Which is better helicoil or time-sert?
Table of Contents
Which is better helicoil or time-sert?
After doing a bit of research it sure seems to me that the Time-Sert is the clear choice for a more full-proof ‘permanent” fix. The only advantage to a Helicoil I found, is that it is cheaper. Being in the industry for a little while I have seen time and time again, that cheaper is never better.
How do you size a time-sert?
Measure from either the spark plug (washer) or (taper) to the last thread. (NOT to the end of the electrode). This will give you the correct length on insert. TIME-SERT® inserts cannot be shortened for length.
What is the advantage of using a time Sert for repairing damaged threads?
What is the advantages of using Time Sert thread repair compared to Helicoil? The Time Sert thread repair system employs a thin wall, self locking, solid bushing insert with positive placement on installation for “accurate specific depths”. This ensures that the insert does not wind down into the threaded hole.
Can a TIME-SERT be removed?
TIME-SERTs can be removed with a spiral point screw extractor, or drilled out with the drill that came in the repair kit. Not recommended to use ez-out or screw extractor on BIG-SERT because of the locking pin at the bottom of BIG-SERT it will create a cam lock effect. Drill out BIG-SERT’s.
Who manufactures Keensert?
Keenserts® are a product of the Camloc brand. Camloc are experts in the fastenings industry with over 80 years’ experience and in-depth product knowledge.
Can you stack time serts?
Yes, if the threads in the base material are not damaged a new TIME-SERT can be re-inserted into that hole. This is a common practice on CNC pallet changers.
Are HeliCoil stronger than original threads?
If a thread is “static” i.e. not likely to be done up and undone more than a few times in its lifetime, we would always say a helicoil type thread is the strongest option.
What is a keen sert?
A Keensert is a solid threaded bushing-style insert that is available in standard dimension metric and inch sizes. The insert is provided with keys that lock the insert to the workpiece during installation.
