What is ZIF computer socket?

What is ZIF computer socket?

A zero insertion force (ZIF) socket is a type of integrated circuit (IC) socket which is designed so that it requires no force at all, except gravity, to insert an IC into the socket.

Why is it called a ZIF socket?

Zero insertion force (ZIF) is a type of IC socket or electrical connector that requires very little force for insertion.

How is a chip installed in a ZIF socket?

When you have matched up Pin 1 on the PGA chip with Pin 1 on the ZIF socket, carefully place the processor into the socket and then pull the lever down to lock it in place. Just lay the chip into the socket; don’t push it in.

Where is ZIF?

Zif (Arabic: زيف) is a Palestinian village located 7 kilometers (4.3 mi) south of Hebron. The village is in the Hebron Governorate in the southern West Bank. According to the Palestinian Central Bureau of Statistics, Zif had a population of 848 in 2007.

What is the purpose of the ZIF lever next to the CPU socket?

Short for zero insertion force socket, the ZIF socket was designed by Intel and included a small lever to insert and remove the computer processor. Using the lever, allows you to add and remove a computer processor without any tools and requires no force (zero force).

What is ZIF and LIF?

“ZIF” stands for “Zero Insertion Force”, and “LIF” stands for “Low Insertion Force”. They’re both talking about the same kind of ATA connector.

What is a ZIF socket quizlet?

What is a ZIF socket? A special socket for inserting and securing a processor. Explanation. Newer motherboard use a ZIF (Zero Insertion Force) socket for inserting the processor. A ZIF socket has a lever or screw that opens to install the processor and closes to lock the processor into place.

What is a LIF connector?

Short for low insertion force, LIF sockets are sockets commonly used for early generation computer processors. The LIF socket does not contain an arm like that used in a ZIF socket. A special tool is required to remove the processor or chip from the LIF socket.

What is a ZIF socket Testout?

STUDY. What is a ZIF socket? A special socket for inserting and securing a processor. Newer motherboards use a ZIF (Zero Insertion Force) socket for installing a processor.

How many pins are in socket R?

1,156 pins
Also called Socket R. It replaces LGA 1366 sockets in high-end desktop systems. LGA 1156. 1,156 pins.

What is pitch on a ribbon cable?

Ribbon cables are often specified with the number of conductors and the spacing between them. With this type of cable, the conductors may also be referred to as “ways” and the spacing may be referred to as “pitch.” The most common pitch for ribbon cabling is 0.050 inches or 1.27 millimeters.

What happens if you install a processor with the wrong chipset?

What will happen if you install a processor on a motherboard that can fit the socket but is the wrong chipset? Installing a processor that fits the socket of a motherboard but is not compatible with the motherboard’s chipset can damage both the processor and the chipset.

What is a LIF cable?

Description. Zif Jumper (FFC Cable) is a highly Flexible Flat conductor Cables compatible with ZIF (Zero Insertion Force) or LIF (Low Insertion Force) connectors. Defined stripping of insulation and application of stiffener in the contact area provides safe connection to all conventional connectors.

How do ZIF connectors work?

ZIF sockets normally work with a two-piece plastic housing. One piece affixes the contacts to the PCB and the second piece is cam activated with a lever or screw fitting to close the contact beam after the package under test is fully inserted.