What are the 2 types of oxy-fuel cutting torches?

What are the 2 types of oxy-fuel cutting torches?

Oxy-acetylene welding torches are mainly categorized into two types: one is the low pressure type which is also called as the injector type; second is the equal pressure type. In the low pressure or injector type torch, see figure 1 below, the acetylene pressure is kept below 1 psi (6.89 kPa).

How much does an oxy-acetylene torch setup cost?

Initial set up cost for a typical medium duty oxy-fuel system is $230 – $500.

What is the difference between gas welding torch and gas cutting torch?

What is the difference between a cutting torch and a welding torch? A cutting torch is for cutting metal while a welding torch is for melting and joining pieces of metal together.

Which is better plasma cutter or oxy-acetylene?

Faster speeds on thinner metals: Plasma can cut thinner metals faster than oxy-fuel can, and with minimal or no metal distortion. Plasma also offers better performance when cutting stacked metals.

How much is a bottle of oxygen and acetylene?

The costs for filling your acetylene and oxygen tanks differ due to the tank capacity, with bigger tanks per cubic foot less costly. A tank of around $20, #4 at $80, and #5 onwards would run around $120. Oxygen is about $20 for 240 cubic feet or about 300 cubic feet and $35 for your bigger 300 feet.

How hot does a petrogen torch burn?

TEMPERATURE. The flame temperature of the Petrogen Liquid Fuel Torch ranges from 5200 to 6400 degrees Fahrenheit. The high temperature allows operators to maintain ignition on steel that is painted, rusty and wet with greater ease than torches that use compressed gases.

Which metal can be cut by oxy-acetylene gas cutting?

Oxy-acetylene can cut only low- to medium-carbon steels and wrought iron. High-carbon steels are difficult to cut because the melting point of the slag is closer to the melting point of the parent metal, so that the slag from the cutting action does not eject as sparks but rather mixes with the clean melt near the cut.

Can you cut cast iron with oxy-acetylene?

Generally, oxy-fuel torches are used for heavy metals such as steel and are frequently used in scrap yards to cut scrap metals. These torches should not be used to cut metals like cast iron, aluminum, or stainless steel.

How thick of steel can a torch cut?

6 to 12 inches thick
Oxy-fuel torches also offer versatility, as they are capable of cutting, welding, brazing, soldering, heating and gouging. The average hand-held system can cut steel 6 to 12 inches thick. However, some oxyfuel hand torches are able to cut steel more than 20 inches thick.

How thick can an oxy-acetylene torch cut?

While the cuts may not be as clean, oxy-acetylene will carve through material up to 24 inches thick. That’s 1,200% thicker material than plasma cutters can handle. Oxy-fuel is also one of the most portable methods of cutting. With just two gas tanks and a torch, you can cut anywhere.

Can you cut steel with oxy propane?

Many metal workshops use cutting torches to shape and cut a variety of metal. Cutting torches use a gas and oxygen to cut through metal; the gas provides the heat while the blown oxygen cuts the metal. The gases you can use with oxygen in cutting torches includes acetylene, propane and others.

Is propylene hotter than acetylene?

Using propylene for cutting results in more BTUs of heat for more effectively heating large parts and thick metals. Also, the chemistry of propylene results in better heat transfer properties than acetylene which means you can increase productivity by producing faster cuts.

What can oxyacetylene torches cut?

An oxyfuel torch can be fitted with cutting attachments instead of using a welding head. The cutting attachments can be used to cut steel approximately 6 inches thick. Oxyfuel cutting operations can use gasses such as oxygen, acetylene, MAPP, natural gas and propane.