How does MotorGuide pinpoint GPS work?

How does MotorGuide pinpoint GPS work?

The Pinpoint GPS Anchor features draws on a GPS satellite receiver, two separate digital compasses, and an advanced algorithm for super accurate virtual anchoring control. Simply press the anchor button the handheld remote and you’ll be locked in place to free you up to cast for your trophy fish.

Where is the serial number on a MotorGuide Xi5?

The serial number tags are located on the trolling motor as shown. Record the serial number and the model number in the space provided in the Warranty Information section of this manual.

Does MotorGuide Xi5 have spot lock?

The MotorGuide XI5 has its own version of Spot-Lock, i.e., virtual anchor technology. Anglers can take advantage of this trolling motor to lock GPS positions as they see fit and can even jog anchor position if needed.

How do you read a MotorGuide serial number?

When using your Tour Series foot pedal, press the heel into the fully down position. There will be a sticker under the toe with your serial number printed on it. Your serial number is also found on the outside of the trolling motor box and on the included registration card.

How do I update my Xi5 trolling motor?

Make sure the Xi5 has a GPS lock (blue GPS light will be lit on the trolling motor). needs to be updated. Press OK to update Xi5 software. → Note: If you select Close on the Trolling motor update dialog, you will not be prompted to update Xi5 software until the HDS unit is powered on again.

What year is my Motorguide trolling?

The first letter denotes the year; three subsequent numbers stand for the day of the year when it was made; then comes the product code, then the serial number. So, a trolling motor with the code J003MK99999 tells you the year it was made in the first letter: J=9.

Can you add spot lock to a MotorGuide trolling motor?

However, if your trolling motor doesn’t have an anchor lock, you can buy an upgrade kit for your Xi5 or Xi3 motors. The kit will help you to add a spot-lock feature to your trolling motor. The kit consists of a MotorGuide Pinpoint GPS Module and MotorGuide Pinpoint GPS Remote.

How do I know what year my trolling motor is?

2009 and later serial numbers: The first letter is the year code, the next 3 numbers is the number of the day of the year (out of 365), The next 2 letters are the product code, the last numbers are the serial number.

How do you tell what year a trolling motor is?

The first letter of the serial number determines the year. The following three numbers determine what day of that year the trolling motor was made. Example 092 is April 2nd.

What kind of transducer is in a MotorGuide Xi5?

Lowrance 83/200kHz transducers
The MotorGuide Xi5 is equipped with universal integrated sonar. It has a preinstalled Lowrance 7-pin connector and uses Lowrance 83/200kHz transducers, making each movement of the boat stealthily quiet and smooth. Its PinPoint GPS technology provides never-before-seen GPS navigation options.

Where is the model number on a MotorGuide trolling motor?

For warranty purposes, complete the enclosed warranty card or register your trolling motor at www.motorguide.com. The transom mount serial number decal is located underneath the bottom cover. The bow mount serial number decal is located underneath the bottom cover.

Do I need a heading sensor for spot lock?

No, you don’t need the heading sensor for spot lock, since spot lock relies on the GPS coordinates measured by the i-Pilot controller, which is located inside the Control Head of the trolling motor.

Do you need fish finder for spot lock?

No, you don’t need a fish finder to use spot lock, since a spot lock trolling motor comes with its own built-in GPS system, which can effectively keep you in a specific spot without the help of a fish finder.

Where is the model number on a Motorguide trolling motor?

Where is the serial number on a trolling motor?

The Serial Number is engraved into the side of the transom bracket where the holes for the tilting mechanism are located.

Can I add I-pilot to my trolling motor?

i-Pilot is compatible with all fresh and saltwater Ulterra, Terrova, and PowerDrive (2007 or newer) trolling motors. It is also compatible with Ultrex motors. Select trolling motors do come with the i-Pilot trolling motor system pre-installed.

  • August 27, 2022