How do you reset the drum on a Brother HL 3170CDW?

How do you reset the drum on a Brother HL 3170CDW?

Brother HL-3170CDW – Reset Drum

1. Press the Up arrow key while holding down “Go” on the printer’s control panel.
2. Press the Up or Down arrow key to display Drum Unit.
3. Press the Up or Down arrow key to display the colour of the drum unit that you replaced.
4. Press the Up arrow key for “Reset” to reset the drum counter.

How do you reset the drum on a Brother HL l2395dw?

Reset the Drum Counter

1. Make sure the machine is turned on.
2. Close the front cover.
3. Press. (Cancel).
4. Press and hold. (Toner) for five seconds.
5. Press Drum, and then press Yes.

How do you reset the drum on a Brother HL L3230CDW?

Reset the Drum Counter (HL-L3210CW/HL-L3230CDN/HL-L3230CDW)

1. Make sure the machine is turned on.
2. Make sure the machine’s cover is closed.
3. Press OK and at the same time.
4. Press OK to select [Drum].
5. Select the toner color for the drum unit you just replaced, and then press OK.
6. Select [Reset] to reset the drum counter.

How do you reset the waste toner box on a Brother HL 3170CDW?

Your Brother HL-3170CDW printer has a self-cleaning mechanism that cleans the drive belt, also known as the waste box. Open the front cover then close it and you will hear a whirring sound. After the whirring sound, close the cover for a few seconds then open the front cover again.

How do you reset the drum on a Brother HL?

How to Reset Drum on Brother HL-L2370dw

1. Make sure the printer is on.
2. Close the front cover.
3. Hold down the “OK” button and the “up” arrow at the same time.
4. Press the “OK” button to select “Drum”.
5. Select the “down” button to reset the drum counter.
6. The printer will say accepted when drum is reset.

How do you reset the drum on a Brother printer HL L5100DN?

HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L5200DWT/HL-L6200DW/HL-L6200DWT

1. Make sure the machine is turned on.
2. Open the front cover.
3. Press and hold OK for about two seconds to display the [Drum Unit] option, and then press OK.
4. Press for [Reset] to reset the drum counter.
5. Close the front cover of the machine.

Can I empty the waste toner box?

Your toner waste container shouldn’t end up in the trash, instead you can empty and reuse it. Empty the toner waste container yourself in four easy steps: Release the waste container, which is located in the inside front cover under the toner cartridges. Pull out at a 45-degree angle with a garbage bag in hand.

How do you reset waste toner box error?

1. Remove the waste toner box, by lifting it up and out of the machine using the green handle located on the front of the box.
2. Clean the two metal contacts located on the back of the waste toner box with a dry cloth or paper towel.
3. Reinstall the waste toner box in the Brother machine.

Can you reuse a brother waste toner box?

DO NOT reuse the waste toner box. Unpack the new waste toner box and install the new waste toner box in the machine. Make sure the waste toner box is level and fits firmly into place. To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations.

How do I reset my Brother drum life?

To reset the drum counter:

1. Press the UP OR DOWN ARROW key to select Machine Info.
2. Press the UP OR DOWN ARROW key to select Reset Parts Life.
3. Press the UP OR DOWN ARROW key to select Drum Unit.
4. Press the UP ARROW key to reset the drum unit counter.
5. The display will show ‘Accepted’ and the machine will return to ‘Ready’.