DO 213AA SOD 80?

DO 213AA SOD 80?

MiniMELF is a cylindrical, surface mount component package whose most common use is for packaging diodes and resistors. This package often comes under the alternative names SOD-80 or DO-213AA.

DO 213 package?

The DO-213 package is a Surface Mount Device [SMD]. This package style is also called a Melf package; metal Electrode Leadless Face. How to Derate a DO-213 package based on temperature. The URS SMD is another style of Melf package.

When would you use a MELF resistor?

MELF resistors are able to provide higher levels of performance in terms of long term stability, moisture resistance, reliability, and the resistance to the effects of temperature cycling experienced int he soldering processes used today.

What are MELF resistors?

MELF resistors consist of a homogeneous film of metal alloy deposited on a high-grade ceramic body. Nickel- plated steel termination caps are pressed on the metalized rods, before a special laser cuts a helical grove in the resistive layer to achieve the target resistance value.

Do-214AC vs do 214AB?

DO-214AA, also known as SMB, is the middle size. DO-214AB, also known as SMC, is the largest size. DO-214AC, also known as SMA, is the smallest size.

Do-214AC vs do 214AA?

What is an SMD resistor?

A surface mount resistor is a tiny rectangular ceramic body with silver conductive edges on either end. Also referred to as surface mount technology, an SMD resistor offers advantages in saving space on printed circuit boards (PCBs). It features the resistance value code printed onto it, where there is space.

Do SMA do-214AC?

DO-214AA, also known as SMB, is the middle size. DO-214AB, also known as SMC, is the largest size. DO-214AC, also known as SMA, is the smallest size. DO-214BA, also known as GF1.

Do 214AB vs do 214AC?

Do 41 packages have a size?

Note that most data sheets indicate a minimum body length of 4.06mm [listed as max in the graphic] and a maximum body length of 5.21mm. The diameter also differs from the diagram above; the maximum component diameter shown is 2.16mm, but usually given in the 2.00 to 2.72mm in the data sheet.

What is SMD package?

SMD package types describe the physical characteristics of devices that use surface mount technology (SMT) for attaching electronic components directly to the surfaces of printed circuit boards (PCB). In other words, an SMD is an electronic component that attaches to a PCB with SMT.

Do Zener do 214?

ONSEMI Zener Single Diode, 5.6 V, 1.5 W, DO-214AC (SMA), 5 %, 2 Pins, 150 °C

What is a DO 41 Diode?

The DO-41 (also known as DO-204-AL or SOD66) is a common semiconductor package used to encapsulate rectifier diodes (i.e., diodes meant to handle larger currents and voltages than signal diodes). The name is derived from the JEDEC descriptor “Diode Outline, Case Style 41”.