What should the tire pressure be on a Harley-Davidson Road King?

What should the tire pressure be on a Harley-Davidson Road King?

Springtime: Check Your Tire Pressure! Most Harley-Davidson® motorcycles are equipped with Dunlop® tires; the tire pressures (cold) should be 36psi front and 40psi rear.

What pressure should my RV tires be at?

The tire pressure on an average 16″ RV tire can be anything between 35-80 PSI or 280-550 kPa. That’s a wide range – and you need to find the right number for your specific weight and number of wheels.

What psi should truck tires be?

Most typical tires require about 32 to 35 pounds per square inch (PSI) of air, says Rod Tate, owner of highly rated Colony One Auto Center in Stafford, Texas. Large trucks require much larger tires with PSIs of 50 to 60. Heavy-duty vehicles can go even higher.

How much air pressure should I put in my motorcycle tires?

A typical range for these would be between 80 and 130 psi, although racers can sometimes go as high as 160 psi. Quick tip if you’re caught inflating a road tire without a gauge and need to ballpark it: at 100 psi, a tire can barely be compressed with your thumb.

How much air do I put in my Harley shocks?

See the Touring model’s owner’s manual for valve location. Add 3-5 psi to clear the line but do NOT exceed 50 psi. 5.

Should I inflate motorhome tires to max psi?

Never inflate tires more than 10 PSI above the maximum PSI rating imprinted on the sidewall. Never install tires rated less than required per the Certification Label. Never consider an anticipated temperature change during the day’s travel when setting the morning cold inflation pressure.

Should I fill my camper tires to max psi?

When it comes to trailer tires you always want to have them inflated to their max psi when cold. Not only do you get the full capacity at the max psi, you also will generate less heat in the tire since there won’t be as much flex in the sidewall, you’ll get better wear and better fuel mileage.

Is 80 PSI too high for tires?

The 80 psi is required if the tire is operating at rated load. You most likely have a load range E tire.

Should truck tires be inflated to max PSI?

Secondly, most vehicles have the recommended tire pressure listed on the door jamb sticker. You should not fill your tires to maximum tire pressure, which is displayed on the sidewall of the tire. Among other things, this can lead to structural failure of the tire. Such a failure will most likely result in a blowout.

Where do you find the proper PSI for a trailer?

Trailer tires can look fully inflated and be below the safe air pressure. Find the maximum tire pressure by looking at your tire sidewall. Look for the small notation “Max. Load” followed by a PSI number (80 in the example below).