What is the recommended insulation thickness for an attic?
Table of Contents
What is the recommended insulation thickness for an attic?
about 10 to 14 inches
The recommended level for most attics is to insulate to R-38 or about 10 to 14 inches, depending on insulation type.
What R-value insulation do I need for my attic?
between R-30 and R-60
For homes in California, the attic should achieve an R-value between R-30 and R-60. Most areas of the country have a higher minimum R-value recommendation, but just about everywhere recommends up to R-60.
Is R-30 enough for attic?
The average recommended level is 14 inches of R49. In Zone 2, the average minimum requirement for attic insulation is 9 inches of R30 fill. The average recommended level is 17 inches of R60. In Zone 3, the average minimum requirement for attic insulation is 9 inches of R30 fill.
How thick is R30 attic insulation?
8¼ ” thick, R-30C EcoTouch® Thermal Batt insulation prevents moisture damage and helps assure long roof life by providing 1″ of ventilation air space between the insulation and roof deck. Easy Installation R-30C EcoTouch® Thermal Batt insulation is easy to handle and install.
Is R60 attic insulation worth it?
Recommended R-Value Varies by State You need exactly as much as the area you live in determines. Here, where temps get pretty hot for much of the year, attics should have from R30 to R60 (average is R38). Those living up north want anything from R49 to R60. This helps insulate against the extreme cold weather.
Is R 38 insulation Good for attic?
So, for your attic insulation, we have a minimum standard of R-38, and a recommended standard of R-49. R-Value is explained as thus: “the resistance, or strength of a material to slowing down the flow (movement) of heat”. Generally speaking, cellulose attic insulation doesn’t care which way the heat is moving.
How many inches is R38?
Fiberglass Chart
| R-Value | Thickness | Bags / 1000 Sq Ft |
|---|---|---|
| R49 | 16.25” | 22.6 |
| R44 | 14.75” | 20.1 |
| R38 | 12.75” | 16.8 |
| R30 | 10.25” | 13.0 |
Can I have too much insulation in my attic?
It’s possible to over-insulate an attic as too much will cause moisture buildup and eventually result in mold. Eventually, adding more insulation leads to diminishing returns in trapping heat as well.
Is R60 insulation too much?
What is R 38 insulation used for?
10¼ ” thick, R-38C EcoTouch® Thermal Batt insulation prevents moisture damage and help assure long roof life by providing 1″ of ventilation air space between the insulation and roof deck.
Can an attic have too much insulation?
Does doubling insulation Double R-value?
Doubling the thickness of insulation will double the insulation’s R-value, cutting heat loss in half. Each time the insulation layer is doubled in thickness, this rule applies.
