What is EIGRP named mode?

What is EIGRP named mode?

The named mode is the new way of configuring EIGRP; this mode allows EIGRP configurations to be entered in a hierarchical manner under the router mode. Each named mode configuration can have multiple address families and autonomous system number combinations.

What is EIGRP configuration?

EIGRP (Enhanced Interior Gateway Routing Protocol) is an enhanced distance vector protocol that uses Diffusing Update Algorithm (DUAL) for shortest path calculation. Basic configuration enables EIGRP routing process and tells EIGRP which interfaces to include in routing process locally.

Under what configuration mode for named EIGRP would you configure a passive interface?

To configure an EIGRP interface as passive, you use the command passive-interface interface-id under the EIGRP process for classic configuration.

What is leak map in EIGRP?

The leak-map just allows you to advertise a specific prefix within the range of a summary advertisement, as well as the summary itself. We can see in the diagram below that we are advertising the 10.0. 0.0/13 network out to R5 & R6, however, we are also advertising the 10.1.

What is the difference between BGP and EIGRP?

BGP uses Transmission control protocol (TCP) port 179. 1. EIGRP stands for Enhanced Interior Gateway Routing Protocol. BGP stands for Border Gateway Protocol.

What is a stub in EIGRP?

Stub routers in EIGRP, are nodes that are designed to be only directly connected to networks and are not designed to be in transit for the data plane. Meaning, EIGRP stub routers are designed for very small branch office routers or for edges of the network.

What is stuck in active in EIGRP?

STUCK IN ACTIVE. Indicates that the EIGRP neighbor is resetting because EIGRP is stuck in active state. The neighbor getting reset is the result of stuck in active. Troubleshoot from the stuck in active point of view. Refer to the section “EIGRP Neighbor Problem—Cause: Stuck in Active.”

Why EIGRP is hybrid protocol?

EIGRP is called a hybrid protocol because is uses metrics from both distance vector protocols and link state protocols. Configuration of EIGRP on a Cisco router is similar to enabling other routing processes. All that needs to be done to start EIGRP on a Cisco router is to define an EIGRP routing process.

What is the difference between an active route and a passive route?

NOTE The EIGRP term “active” refers to a route for which a router is currently using the Query process to find a loop-free alternative route. Conversely, a route is in passive state when it is not in an active state. The neighboring routers view any received Query messages as an input event.

Is EIGRP a link-state?

Technical details. EIGRP is a distance vector & Link State routing protocol that uses the diffusing update algorithm (DUAL) (based on work from SRI International) to improve the efficiency of the protocol and to help prevent calculation errors when attempting to determine the best path to a remote network.

What is leak-map in EIGRP?

What is summary route in EIGRP?

Route summarization is a method of representing multiple networks with a single summary address. It is often used in large networks with many subnets because it reduces the number of routes that the routers must maintain and minimizes routing updates.