How much does an ACU IOTV cost?
Table of Contents
How much does an ACU IOTV cost?
The IOTV Conversion Kit takes the soft-armor, ballistic inserts from existing IOTV inventories and places them into a new carrier, creating the latest-generation vest. A Gen III IOTV ordered from DLA costs $791 per system, but the average unit cost of a Gen III Conversion Kit is $413.
How much does an IOTV 2 weigh?
However, a fully equipped IOTV, complete with all its components (soft armor panel inserts, four ballistic plate inserts (front and back plates and two side plates), collar, and groin protectors) still weighs 30 pounds, with a Large IOTV weighing about 35 pounds.
How much does an IOTV weigh?
The basic system weight (IOTV, ESAPI, ESBI, size medium) is 31 pounds and provides increased area coverage and greater protection. The medium IOTV, without plates, weighs 15 pounds and protects against fragmentation and 9mm rounds.
How much does an IOTV weigh with plates?
about 31 pounds
The IOTV, when loaded with heavy plates, weighs about 31 pounds, while a comparable TEP system checks in at about 23 pounds, or 26 percent lighter. Brown said the Army pushed with industry to reduce weight while meeting future threats.
How much does US Army body armor cost?
A complete Interceptor system costs $1,585. The Interceptor system’s component ceramic plates currently cost about $500 each.
Who makes the army Iotv?
The IOTV is currently produced by Point Blank Body Armor, BAE Systems, KDH Defense Systems, Protective Products Enterprises, UNICOR and Creative Apparel Associates.
What is FLC Army?
Military Issue ACU Fighting Load Carrier Vest, Used The MOLLE System Fighting Load Carrier knowns as the FLC, is designed to be a standalone vest that will also fit underneath the full MOLLE ruck pack. The FLC vest is made to support heavy loads, be breathable and give options on how you want to set it up.
What does IOTV stand for?
Service: US Army. The Improved Outer Tactical Vest (IOTV) is designed to permit maximum freedom of movement required for soldiers to assume correct firing positions with the agility to execute and maneuver tasks.
Does the Army still use IOTV?
Since then, the OTV component has been replaced with the IOTV for the U.S. Army and the MTV and SPC for the U.S. Marines. The U.S. Army Reserve (as of 2018), Army National Guard (as of 2020), and U.S. Navy still use the OTV, the latter aboard its warships (as of June 2017).
Can you put your IOTV in the washer?
Do not machine wash or dry vest. Machine washing /drying will damage or destroy the IOTV and Plate Carrier. Hand-wash IOTV and Plate Carrier outer shell and component carriers only in cold water or warm water, using a mild detergent or soap.
Can a 5.56 penetrate body armour?
Chief: The Army has developed a bullet that penetrates 5.56 mm-resistant body armor. Army Chief of Staff Gen. Mark Milley told senators Thursday that the Army has developed a round that can penetrate 5.56 mm-resistant body armor.
What does IOTV mean in Army?
Improved Outer Tactical Vest
Manufacturer: Point Blank. Service: US Army. The Improved Outer Tactical Vest (IOTV) is designed to permit maximum freedom of movement required for soldiers to assume correct firing positions with the agility to execute and maneuver tasks.
What replaced the IOTV?
modular scalable vest
The TEP can replace the IOTV, at less weight and greater scalability, depending on the mission. It includes the modular scalable vest, the ballistic combat shirt, the blast pelvic protection system, and a battle belt, which is aimed at getting weight off a Soldier’s shoulders and onto the hips.
Does the Army still use FLC?
Still used by the US armed forces. This is the vest base of said system. The Fighting Load Carrier (FLC) vest is very well designed: the whole thing is covered with PALS-loops and can be adjusted in all directions to fit virtually any user.
What is an army LBV?
LBV. Load – Bearing Vest. Us Army, Army, Military Jargon.
How heavy is a military bulletproof vest?
Altogether the full system weighs some 16 pounds (7.25 kg), but it provides protection against 7.62-mm full-metal-jacket rifle bullets—a level of protection that earlier versions of body armour could not provide.
Who makes US Army body armor?
UNICOR
Interceptor Body Armor
| Interceptor Multi-Threat Body Armor System | |
|---|---|
| Designer | DARPA |
| Designed | April 1998 |
| Manufacturer | Point Blank Body Armor (inaugural manufacturer), UNICOR (current manufacturer, since 2008) |
| Produced | July 1998 – present (production to conclude in April 2020) |
