How do you adjust the front fork suspension on a motorcycle?
Table of Contents
How do you adjust the front fork suspension on a motorcycle?
Set sag on front forks Use a cable-tie, compress the forks, let them settle and push the cable tie up to the outer dust seal. Get off, and take the weight off the front so the forks are fully extended. The sag is the distance it’s travelled.
How do you adjust preload on shocks?
Rear shock preload To adjust the preload on your bike’s rear shock, you will need a C-spanner to loosen the top locking ring and spin it up the shock to gain access to the adjuster ring. If you want to increase preload so the spring has less travel and to make the bike feel stiffer, turn the adjuster ring clockwise.
How do you fix a stiff suspension?
Thankfully with these tips, you can adjust the suspension to enjoy your ride a bit more:
- Start by installing softer shocks and struts.
- If you have adjustable shocks, adjust them to a softer setting.
- Install softer springs.
- Replace the bushings in the suspension.
- Replace the sway bars with smaller bars.
How do you raise the front suspension on a motorcycle?
Raising front suspension is achieved by pulling out the fork legs from upper triple clamps. This results in increase in castor angle, higher trail ratio, slight increase in wheel base, higher seat height & higher center of gravity.
How do you adjust motorcycle shock preload?
To adjust the preload on your bike’s rear shock, you will need a C-spanner to loosen the top locking ring and spin it up the shock to gain access to the adjuster ring. If you want to increase preload so the spring has less travel and to make the bike feel stiffer, turn the adjuster ring clockwise.
How can I make my front suspension softer?
Swapping the shock absorbers built for firmness with ones that are made for comfort is an easy way to soften the suspension. Depending on what suspension system is on your vehicle, you can also opt to install Air Suspension.
