Can you put Bondo over fiberglass?

Can you put Bondo over fiberglass?

Bondo Body Filler cures fast, shapes in minutes and is formulated to be a non-shrinking and permanently durable material. In addition to its uses on vehicle exteriors and other metal surfaces it is also a suitable repair option for wood, fiberglass and concrete.

Can you use Bondo on fiberglass resin?

Along with its strength, Bondo® Fiberglass Resin is also simple to use. It is easily mixed using the included Bondo® Liquid Hardener, designed specifically for use with Bondo® fillers and resins….Bringing Science to the Art of Auto Body Repair.

What will Bondo not stick to?

Clean and sand or scuff the surface to prepare it for body filler — it will not adhere to smooth, dirty or oily surfaces. Generally, if paint will stick, so will Bondo. 7. Conversely, if there’s an area you don’t want Bondo to stick to, apply a release agent (see tools and materials) or use Scotch tape or wax paper.

What will stick to fiberglass?

What is the best adhesive to bond fiberglass?

• Cyanoacrylate – also known as instant adhesives, super glue, crazy glue, ca glue, etc.
• Two component epoxies – Permabond two part epoxies cure at room temperature and provide strong bonds to fiberglass.

Can you use car body filler on fiberglass?

This filler can be used over bare metal or fiberglass. In auto body, it is normally the first coat applied over welded repair.

Will fiberglass stick to body filler?

The fiberglass resin can cure to a very smooth finish that paint may not stick to permanently. When you sand it you put tiny scratches in the surface. The body filler will penetrate these tiny scratches and adhere well.

Does epoxy stick to fiberglass?

Epoxy is a great adhesive One reason that an epoxy product such as WEST SYSTEM® Epoxy is so useful for fibreglass boat repairs is that it’s an incredibly effective adhesive. It creates a resilient bond to fibreglass, cured polyester laminates, wood and metals – even when you only use a thin film.

Does Bondo filler stick to plastic?

Archived. If you rough up the plastic with some 80 grit sandpaper and then wipe it down with some lacquer thinner (or something similar to clean it), the Bondo will stick just fine. Don’t mix more than you can apply in about 5 minutes.

Can I use Bondo without hardener?

Without it the bondo won’t get hard. Put a small piece of bondo on a board and run a line of hardener from end to end. It will take about five minutes to mix it up and apply it. If it starts tacking up, stop applying it or you’ll mess it up.

Does Liquid Nails work on fiberglass?

FRP Liquid Nails Work Great We are doing a remodel in our kitchen and put up fiberglass reinforced panels. We used the Liquid Nails FRP on our panels and the adhesive has held amazing well! The adhesive protects the panels from chemical effects and was easy to apply.

Will JB Weld stick to fiberglass?

The results of the JB Weld Plastic Bonder fiberglass repair were excellent. Not only was the process quick and easy, but the panels look like they did from factory. The bond is strong; we would use this stuff on just about any plastic or fiberglass component that needed to be repaired.

Will Bondo stick to gelcoat?

bondo has a polyester resin base so ya… polyester fiberglass resin (or gel-coat) will bond fine.

Can you use polyester filler on fiberglass?

Re: Epoxy fiberglass over polyester filler? You will be fine.

Will epoxy bond to bondo?

As long as the bondo is cured, no worries my friend. Just scuff it with sand paper and your good to go. Epoxy will stick just fine.

What Bondo can you use on plastic?

Bondo is polyester based. It will adhere to acrylic (plexiglass), but it might dissolve some types of styrene plastic. If you are gluing plastic, a solvent bond is best. Buy a solvent for the type of plastic you are using.

Does Bondo fiberglass stick to plastic?

Will fiberglass resin stick to plastic? The answer is simple and oh, it’s a yes! To say it straight away; yes, fiberglass resin will easily bond with plastic and is commonly used as an adhesive for repairs and reinforcement.