What setting should my Baxi boiler be on?
Table of Contents
What setting should my Baxi boiler be on?
If you’re looking for a good balance of warmth and efficiency, you want to set your boiler to at least 65°C. Setting it a few degrees higher won’t hurt. But it’s important not to set it any lower than that. This is so bacteria in the water doesn’t grow, and cause nasty things like Legionella.
What do the lights mean on a Baxi boiler?
Red Flashes. 1 red flash means there could be temperature, sensor or flow faults. You will need an engineer to locate the issue. 2 red flashes is a sign your boiler has overheated. Try bleeding your radiators before calling an engineer.
How do I know what Baxi boiler I have?
It can usually be found on a sticker either on the inside of the drop down panel or on a pull out tag underneath. If you call Baxi Customer Support on 0330 678 0917 with the serial number, it has all the information we need to tell you which boiler you have.
What temperature should the hot water be set at on a Baxi combi boiler?
between 60-65°C
Having combi boiler temperature settings between 60-65°C is generally comfortable for most people.
What does a flashing radiator symbol mean on a Baxi boiler?
Baxi Boy Active Member It just means the boiler has got hot enough and burner is off,but water still circulating around radiators,until it cools a bit,then burner will relight.
What pressure should my Baxi boiler be at?
between 1.0 and 2.0 bar
The normal operating pressure for your Baxi boiler is between 1.0 and 2.0 bar. A reading of 1/0 to 1/5 bar is ideal and will ensure that your boiler and central heating are working at maximum efficiency.
How do you ignite the pilot light on a Baxi boiler?
To light the pilot: Looking through the pilot viewing window press the gas control knob fully inwards and hold. Press in igniter button and release. Repeat until pilot ignites. Continue to hold in gas control knob for approximately 15 seconds and then release.
What temperature should the boiler be set at for hot water?
60 degrees
Your boiler controls explained To maximise efficiency, we recommend setting your radiator dial to 75 degrees and your hot water to 60 degrees. Once you’ve got your boiler running at the optimal temperature, you’ll want to set the timer for when you need heating the most.
