What is the Polycom default password?
Table of Contents
What is the Polycom default password?
456
If the default Polycom password of 456 does not work, or if someone has changed the admin password on the phone, please do the following: Find and write down the MAC address (serial number) of the phone you want to reset.
How do I factory reset my Polycom Soundpoint IP 335?
How to factory reset Polycom 335 IP Phone
- Step 1 How to factory reset Polycom 335 IP Phone. Hold 1+7+3+5 while powering on the device.
- By default the password is 456. You can reset the password with the Mac Address on the back.
- Now that the unit had reset configuration and rebooted select Setup.
How do I change my Polycom default password?
Once the phone is registered and is in an operational mode you can change the default password on a Polycom phone by doing the following:
- Click on Menu.
- Select option 3. Settings.
- Select option 2. Advanced.
- Enter Password = 456.
- Select option 1.
- Select option 6.
- Enter Old Password, Set New Password and Confirm New Password.
How do I reset my Polycom Web Configuration Utility password?
How do I factory reset my Polycom VVX?
- Click on the Home button.
- Scroll to the Settings (gear icon) and click on it.
- Go to Advanced.
- Enter the admin password (456 by default)
- Go to Administration Settings.
- Go to Reset to Defaults.
- Go to Reset To Factory.
- Say Yes when it asks Are you sure?
How do I reset my Polycom phone if default password does not work?
To restore phone to factory defaults with the Admin Password:
- Power cycle the phone.
- Press Cancel soft key during the boot process.
- During the countdown, press and hold the following dial pad keys simultaneously until the password prompt appears:
- Enter the administrator password to initiate the reset.
- Press OK.
How do I reset my PIN on my Polycom phone?
How do I enable Web interface on Polycom VVX?
On the Desk Phone interface go to the option >> “Menu Key” >> Select Settings>>Advanced >> login with the password 456 >>> admin settings >>>web server >>> enable http and/or https. Hope this helps!
How do I reset my Polycom IP 335?
