What is RG58 coax?
Table of Contents
What is RG58 coax?
RG-58/U is a type of coaxial cable often used for low-power signal and RF connections. The cable has a characteristic impedance of either 50 or 52 Ω. “RG” was originally a unit indicator for bulk RF cable in the U.S. military’s Joint Electronics Type Designation System.
What is the difference between RG8 and RG58?
RG8 is a thicker 50 ohm cable, at 12 AWG, that can provide a stronger signal than RG58. It is mainly used for amateur radio. There is also a version called RG8X, which is thinner at 16 AWG but provides similar signal quality.
What diameter is RG-58 cable?
Specifications: Nominal outside diameter : 6.15mm. Inner diameter : 1/0.64mm Capacitance : 68pF/m.
Is RG-58 any good?
As far as attenuation and shielding are concerned, RG58 was acceptable.: A good cable up to about the year 2000 but not suitable in today’s environment. A good RG 58 coax cable has cable shield of max. 40dB. But the interferences go very much beyond that and make reception worse or even impossible.
What is the difference between RG-58 and RG59 coaxial cable?
Q: What is the difference between RG-58 and RG-59 coaxial cable? A: RG-58 is 50-ohm coaxial cable and is typically used for radio communications and thin Ethernet networks. RG-59 is 75-ohm coaxial cable for CCTV and cable TV. Some also use RG-6 for video connections.
How much loss is from RG-58?
RG-58 (50 ohm) is about 0.195″, quite lossy, suitable only for mobile installations (typically < 20 feet, < 150 watts). RG-6 (75 ohms) is about 0.332″, typically used for cable/satellite TV. RG-8X (50 ohm); and and RG-59 (75 ohm) are about 0.24 inch.
Can I use RG-6 instead of RG8?
RG6 cables are mainly used for cable internet, cable TV, and that is the most significant difference between the popular RG6 coaxial cables and RG8 cables. RG8 is unable to carry clear video signals because of its design and, consequently, is more appropriate for radio signals.
Is RG59 suitable for digital TV?
RG6 cables carry old analog TV signals as well as digital TV signals. But RG59 cables mainly carry analog video signals. They don’t work well with digital or satellite signals for they cannot deal with such high-frequency equipment.
Which is better RG6 or RG8?
Their biggest difference to the common RG6 coaxial cables used for cable TV and cable Internet is that RG8 is unable to carry pure video signals due to its design, and thus is more suitable for radio signals.
