What is nomenclature of spur gear?
Table of Contents
What is nomenclature of spur gear?
The following terms are related to spur gears: Addendum: The height of the tooth above the pitch circle. Backlash: The clearance between two mating teeth of separate gears. Base circle: A theoretical circle used to generate the involute curve when creating tooth profiles.
What are the profiles of a spur gear?
In spur gear, the tooth profile starts from the base circle, covers the face and flank region and finally ends at top of the tooth. Forms of teeth: Two curves of any shape that fulfil the law of gearing can be used as the profiles of teeth.
What is gear terminology?
Basic Gear Terminology Face Width is the length of the teeth in the axial direction. Outside Diameter (O.D.) is the diameter of a circle around the outer surface, or tops of the gear teeth. Pitch Diameter (P.D.) is the diameter of the pitch circle. Pitch Circle.
What is spur gear and its types?
Spur gears belong to the parallel shaft gear group and are cylindrical gears with a tooth line which is straight and parallel to the shaft. Spur gears are the most widely used gears that can achieve high accuracy with relatively easy production processes.
How do you calculate the PCD of a spur gear?
First, you need to define a series of concepts to perform the spur gear calculations:
- The number of teeth (z).
- Module (m).
- Pitch Diameter (d) is the diameter of the pitch circle; its value is: d = m x z.
- Outside Diameter (de) is the diameter of the outside circle; its value is: de = m (z + 2); de = d + 2m.
What does DP mean in gears?
The Diametral Pitch (DP) is the number of teeth per inch of diameter of the pitch circle.
What are internal spur gears used for?
Internal gears are primarily used for planetary gear drives. Spur gears are generally seen as best for applications that require speed reduction and torque multiplication, such as ball mills and crushing equipment.
What is DP in gear cutting?
How is OD gear calculated?
Automotive Transmission Gear Ratio Equation and Calculator. Screw Worm Gear Axial Force and Thrust Calculator….Helical Gear.
| Calculate | When Defined | Formula |
|---|---|---|
| Outside Diameter (OD) | Pitch Diameter (D) and the Addendum (a) | OD = D + (2 X a) |
| Outside Diameter (OD) | Normal Diametral Pitch (P) and the Pitch Diameter (D) | OD = D + 2/Pn |
What is CP in gears?
CP: Stands for “Circular Pitch”. It’s the distance from a point on a gear tooth along the pitch circle of the gear to the corresponding point on the next gear tooth. Therefore, it’s the difference in repeat between a plate cylinder and the next one in size.
What are the classification of gear?
Gears are classified into 3 categories; parallel axes gears, intersecting axes gears, and nonparallel and nonintersecting axes gears. Spur gears and helical gears are parallel axes gears. Bevel gears are intersecting axes gears. Screw or crossed helical, worm gear and hypoid gears belong to the third category.
What is the formula for PCD?
The Pitch Circle Diameter (PCD) is the diameter of the circle that passes through the centre of all the studs, wheel bolts or wheel rim holes….Pitch Circle Diameter – PCD Calculation Formula.
| 4 Stud PCD = | S |
|---|---|
| 5 Stud PCD = | 0.5878 |
| 6 Stud PCD = | S |
| 0.5 |
What do the numbers mean on metal spur gears?
METALLIC SPUR GEARS W = Tooth Load, Lbs. (along the Pitch Line) S = Safe Material Stress (static) Lbs. per Sq. In. (Table II) F = Face Width, In. Y = Tooth Form Factor (Table I)
What is an involute form spur gear?
308 www.bostongear.comP1930BG 721 I Engineering Information Spur Gears Involute Form Gear teeth could be manufactured with a wide vari- ety of shapes and profiles. The involute profile is the most commonly used system for gearing today, and all Boston spur and helical gears are of involute form.
How many teeth does a 20° involute spur gear have?
64. 3/31/2016 Hareesha N G, Dept of Aero Engg, DSCE, Blore 64 Two 20° involute spur gears have a module of 10 mm. The addendum is one module. The larger gear has 50 teeth and the pinion has 13 teeth. Does interference occur? If it occurs, to what value should the pressure angle be changed to eliminate interference?
How to eliminate gear tooth interference on a spur?
54. Methods of elimination of Gear tooth Interference In certain spur designs if interference exists, it can be overcome by: 1. Removing the cross hatched tooth tips i.e., using stub teeth. 2. Increasing the number of teeth on the mating pinion. 3. Increasing the pressure angle 4. Tooth profile modification or profile shifting 5.
