What is an IBA GE slot 00C8?

What is an IBA GE slot 00C8?

This “IBA GE SLOT 00C8 V1327” is the mechanism for booting via the network. So, the solution was to look at the BIOS menu for Bootable devices, where it had all the usual suspects of Optical drive, HDDs, Floppy Disc, and Removable Media, but also “Boot from Network”.

How do I disable IBA GE slot?

To prevent the Intel Boot Agent (IBA) from initializing, use the Intel® Ethernet Flash Firmware Utility (BootUtil.exe) to turn it off. Intel Ethernet Flash Firmware Utility is a program that: Changes the default settings of your Intel® Ethernet Adapter. Enables or disables the Wake-on-LAN.

What is PCI LAN?

PCI LAN allows a computer to start up and load an operating system or other program directly from the network without any physically attached storage device, like a USB stick or hard drive.

What is embedded GB nic1?

It’s an Embedded (built-in) Gb (Gigabit capable) NIC (Network Interface Controller). It’s the network port on your motherboard, and it shows up as available in your boot order because of Network Booting.

How do I turn off Realtek boot Agent?

How to Get Rid of a Realtek Boot Agent Virus

1. Open the Control Panel from the Start menu.
2. Select “Add/Remove Programs.”
3. Select the “Realtek Boot Agent” in the list of applications that appears.
4. Click “Change” or “Change/Remove” and select “Remove.”
5. Follow the on-screen instructions to fully uninstall the Boot Agent.

What does Intel boot agent do?

The Intel® Boot Agent software provides configuration options that allow you to customize the behavior of the Boot Agent software. You can configure the Boot Agent in any of the following environments: A pre-boot environment (before operating system is loaded) A Windows environment.

What is PCI LAN in boot menu?

What is PXE network boot?

Preboot Execution Environment(PXE) is a client-server interface that allows computers in a network to be booted from the server before deploying the obtained PC image in local and remote offices, for PXE enabled clients.

How do I fix start PXE over ipv4?

Here’s how to do this:

1. Open the BIOS.
2. Go to the Boot tab.
3. In case you have this option, it will be most likely located directly in the Boot tab. If so, use the up and down keys to get to Boot Options. Press Enter to change them.
4. Another list will pop up. Look for a Disabled option.
5. Exit the BIOS, saving the changes.

What is embedded NIC?

The Embedded NICs option enables iSCSI or PXE Boot support. This option enables the server to boot to the network (embedded NIC only) and attach to a PXE server with boot images. The option also enables the NIC port to display in the Standard Boot Order (IPL) list.

Is Realtek malware?

Realtek’s Boot Agent is a free application that lets advanced PC users customize computer start-up options. However, because it alters the operating system itself it is prone to viruses or other problems.

Is Realtek audio A virus?

Realtek is not a virus, it is the most commonly used Audio driver setup on PC’s these days, that also make software for other devices on your PC . . .

What is Realtek boot Agent?

Realtek’s Boot Agent is a free application that lets advanced PC users customize computer start-up options. However, because it alters the operating system itself it is prone to viruses or other problems. The first step to a solution if a virus has infected your computer is to uninstall the boot agent itself.

What is PCI LAN laptop?

What is the difference between PXE and iPXE?

While standard PXE clients use only TFTP to load parameters and programs from the server, iPXE client software can use additional protocols, including HTTP, iSCSI, ATA over Ethernet (AoE), and Fibre Channel over Ethernet (FCoE).