How much is a hydro excavation truck cost?

How much is a hydro excavation truck cost?

Buying a hydro vac or straight vac truck for your company isn’t a small decision. With these trucks easily costing $100,000 – $500,000 or more for the more equipped trucks they are incredibly large investments for most contractors to make.

What is a hydrovac truck used for?

As hydrovac trucks continue to be the preferred method for digging, they are often used to: Daylight/pothole to locate underground utilities. Trench soil to install pipelines and cables. Remove debris with ease.

What is a hydro excavator?

What Is Hydro Excavation? Hydro excavation is a soil removing service. Instead of mechanical tools, the process uses pressurized water to create a dirt slurry. Hydrovac equipment can then vacuum the slurry to reveal deeper layers of the ground below.

How much does a hydrovac truck weight?

The truck has 11 cubic yards of debris capacity and can hold 1,350 gallons of freshwater. Empty, it clocks in at 38,500 pounds. The rear axles carry 22,000 pounds of the weight, and the front axles carry 16,500 pounds.

How much does a hydrovac weigh?

Rival Hydrovac Specifications

Curb Weight 33,500 LBS
Height 11’3″
Width 8’6″
Length 30′ 11″
Available Options -185 CFM and 185 PSI Air Compressor -Hydraulic Ports for Tooling -Racing Rims -Creative Decal Wraps -Misting Kits for Dry Vacuuming Applications -Utilicor Coring System -Microcyclone Insert for Dry Applications

How much can a hydrovac truck hold?

We started from scratch and designed it completely around the weight loss.” The Rival Hydrovac has a capacity of 7 yards of debris and 800 gallons of freshwater. As of the 2017 WWETT Show, the company had built and sold about 30 units since debuting the truck in the fall of 2016.

How many yards can a vac truck hold?

Primarily, when it comes to F3 and F4, it is water capacity and debris capacity. So, the Tornado F3 will hold 1250 gallons of water and 10 yards of debris. The Tornado F4 will hold 1550 gallons of water and 12 yards of debris. The Tornado F5 will hold the same 12 yards of debris but 1950 gallons of water.

How fast is hydro excavation?

Travel Time to Get Water for Hydro Excavation Larger hydro excavation units hold around 1300 gallons of water, whereas smaller units can have as little as 350 gallons. So even with the larger water tanks, you likely get between 3-5 hours of hydro dig time before you run out of water.

How many cubes are in a vac truck?

With the most common hydrovacs your capacity limit is reached between 3 and 5 cubic meters (standard capacity), so Super Sucker Hydrvac Services includes a “large” and “extra-large” capacity in its fleet to handle some of the larger excavations ranging from 6 to 12 cubic meters.

How heavy is a vac truck?

Figure 8.5 pounds per gallon of septage plus the weight of the tank. That is how they calculate the weight of the tank loaded. My present vacuum truck is a GMC C6500 and rated at 25,995 pounds GVW. With tank and hoses and everything else, it scales at about 14,990 pounds.

  • October 12, 2022