How long is the string for ring and hook game?
Table of Contents
How long is the string for ring and hook game?
As an example, the hook might be 5 feet 9 inches from the floor, the ring 1 & 1/2 inches in diameter, the rope 8 feet long and a player could stand behind a line 12 feet from the hook.
How do you put a hook and ring game outside?
- Step 1: Screw the Open Hook Into the Center Hole of the Game Board.
- Step 2: Attached Your Game Board to a Wall Using the Adhesive Strips or Screws.
- Step 3: Screw the Eye Hook Into the Ceiling About 5 Feet From the Wall.
- Step 4: Tie the Ring to One End of the String and Hang the Ring on the Open Hook.
What are the dimensions for the ring toss game?
Quick Facts
| Tiki Toss Short Board | Tiki Toss Standard Edition | |
|---|---|---|
| Size | 5.75″ x 2.75″ x 4″ | 13″ x 5.5″ x 4″ |
| Number of Players | 1-10 | 1-10 |
| Made with Bamboo | ✓ | ✓ |
| 5′ Telescoping Pole Included |
How high should Tiki Toss be mounted?
The board should be between 48”-60” from the floor. 3 Screw the eye hook into the ceiling about 5 feet from the wall.
What are the dimensions for the hook and ring game?
The board should be between 48”-60” from the floor. 3 Screw the eye hook into the ceiling about 5 feet from the wall. 4. Tie the ring to one end of the string and hang the ring on the open hook.
How long should the string be in the ring toss game?
Tie the ring onto the string, it should hang down about 4 feet from the backboard and hook. Adjust the length until the ring easily fits onto the hook. If when it swings it hits above or below the hook, it needs to be adjusted. That’s it!
How far apart should washer toss boxes be?
20 feet
Game Setup: Find a flat open space and place the two washer targets 20 feet from each other (about 7 paces). This distance can be changed based on player ability and desired speed of play. Games can be played 1 vs 1 or teams of 2 vs 2.
What size washers do I need for washers game?
around 2 inches
The object of the game is to earn points by tossing metal washers, usually around 2 inches (51 mm) in diameter, and 1⁄8 inch (3.2 mm) thick, toward a hole, usually denoted by a can or PVC pipe, often in a box.
What are the dimensions for washers game?
Regulation board size is 12 inches wide by 48 inches long. However, there are variations available out there that range in size from 12″ wide by 32″ long to 16″ wide by 48″ long. Our preference is for 16″x48″, which is what these directions are based on.
How far apart are washer toss games?
How far apart are washer pits?
25 feet
This is a singles and doubles event. The game field consists of two washer pits, each containing one recessed cup of 4 inches in diameter. The distance from the cup centers is 25 feet. Each player throws three washers toward the opposite cup.
How far apart are the boxes for washers?
The game field consists of two washer pits, each containing one recessed cup of 4 inches in diameter. The distance from the cup centers is 25 feet. Each player throws three washers toward the opposite cup. Players are not allowed to step in front of the box.
How far apart are holey boards?
Place your boards 10 feet apart on level ground (this is the official distance, but can be changes for your game if you’d like). This is your game field. Each individual or team throws 4 washers (one at a time), and the object of the game is to score 21 points first.
