How long do you put a Tommee Tippee microwave steriliser on for?
Table of Contents
How long do you put a Tommee Tippee microwave steriliser on for?
The steriliser has a 4-minute sterilising phase. When the cycle is finished either remove bottles and accessories, or leave the lid closed, and the contents will remain sterile for up to 24 hours.
How much water do you put in Tommee Tippee microwave steriliser?
200ml
How much water should I use in my microwave steriliser? We recommend using 7fl oz/ 200ml of water. Pour it straight into the base of the steriliser.
How long is Tommee Tippee steriliser cycle?
5 minutes
Our Super-steam Advanced Electric Steriliser sterilises up to 6 bottles in just 5 minutes, so you’re ready to prepare a fresh feed for your baby any time of day or night.
How long do you sterilise bottles in microwave?
Here’s how to sterilize baby bottles in the microwave without any other special equipment:
- Start with a clean microwave.
- Fill bottles about halfway with water.
- Microwave on high for one to two minutes.
- Using oven mitts, remove bottles from the microwave, dump remaining water out and let the bottles air dry.
How long should a Tommee Tippee steriliser take?
Our Super-steam Advanced Electric Steriliser sterilises up to 6 bottles†in just 5 minutes, so you’re ready to prepare a fresh feed for your baby any time of day or night.
How long do you sterilize baby bottles in microwave?
Sterilizing baby bottles in the microwave
- Start with a clean microwave.
- Fill bottles about halfway with water.
- Microwave on high for one to two minutes.
- Using oven mitts, remove bottles from the microwave, dump remaining water out and let the bottles air dry.
How long should Tommee Tippee steriliser take?
Our Super-steam Advanced Electric Steriliser sterilises up to 6 bottles†in just 5 minutes, so you’re ready to prepare a fresh feed for your baby any time of day or night.
How do you use a Tommee Tippee steriliser for the first time?
SET UP
- Do not connect to power at this stage.
- Remove all items from inside the steriliser base.
- Pour exactly 80ml of water into the steriliser base.
- Assemble the lower tray (A) with logo front-facing and upper tray (B) and place in the steriliser base.
- Add the lid.
- Connect the lead and plug it into the mains supply.
How long is the cycle on a Tommee Tippee steriliser?
How do you know when Tommee Tippee steriliser is finished?
The light will switch off when sterilising has finished. 9. Allow the unit to cool for 5 minutes before turning it off at the mains, removing the plug and steriliser lid.
How long should a steriliser run for?
Follow the manufacturer’s instructions. Leave feeding equipment in the sterilising solution for at least 30 minutes. Change the sterilising solution every 24 hours. Make sure there are no air bubbles trapped in the bottles or teats when putting them in the sterilising solution.
How long does Tommee Tippee steriliser take?
How do I sterilise baby bottles in microwave?
Do I dry bottles after Sterilising?
There’s no need to dry the equipment. Store equipment in one of the following ways: in a clean, sealed container in the fridge, or in the solution. If you store equipment in the fridge, use it within 24 hours of sterilisation.
How long is the cycle on Tommee Tippee steriliser?
How many ml of water do you put in a Tommee Tippee steriliser?
How much water should I use in my electric steriliser? We recommend using 2.7 fl oz/ 80 ml in the electric steriliser. To make it super easy to remember we have marked 80ml on the bottle with a small dotted line so no matter how little sleep you get you will always remember!
