How do I setup my Cisco IP Phone 7940?

How do I setup my Cisco IP Phone 7940?

How do I configure my Cisco 7940/7960 for SIP service?

  1. Press the Settings key. The Settings menu is displayed.
  2. Highlight Status.
  3. Press the Select soft key. The Setting Status menu is displayed.
  4. Highlight Firmware Versions.
  5. Press the Select soft key. The Firmware Versions panel is displayed.

Do Cisco phones work with FreePBX?

We are running the latest version of FreePBX. We are looking to replace our older cisco small business phones with newer 8800 series 3PCC versions.

Can I use my work Cisco IP phone at home?

Using Your Desk Phone at Home Companies that have Cisco Expressway will be able to bring Cisco 7800 and 8800 series phones home. They can register phones securely back to the corporate phone system. To power the phone, you will need a power supply or power injector. The phone can also directly connect to a home router.

How do I connect my Cisco IP phone to my computer?

First, disconnect the Ethernet cable from the computer and attach it to the network port on the back of your phone. Next, use the Ethernet cable included with your phone to connect the access port on the back of your phone to your desktop computer. Your Cisco IP Phone now shares a network connection with your computer.

How do I access my Cisco IP phone web interface?

On a PC/Laptop connected to the same network as the phones open up a web page and enter the following https://[IP address] in the URL bar at the top. Once you have access to the web GUI enter the login details making sure you log in as “Admin”. Note: Password can be found in devices list in your configuration manager.

How do I remotely access my Cisco phone?

Control Remotely Cisco IP Phones

  1. Login to Cisco Unified Communication Manager.
  2. Go to User Management > Application User > Add New.
  3. Enter the User ID –
  4. Enter the User ID’s Password –
  5. Enter the Confirm Password –
  6. Assign CTI Roles and SuperAdmin Roles for the User.
  7. Click on Save.

How do I connect my VoIP phone directly to my computer?

First, you must take your Ethernet cable and plug each end into the respective port on both your laptop and your VoIP phone. You’ll find a power port and two additional ethernet ports behind your VoIP phone. One is made for a PC connection and the other for Ethernet, make sure to not get those mixed up.

How do I reset my Cisco 7940?

Cisco 7940 / 7960 phone Factory Reset: Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash. If you repeat a key within the sequence, eg: 1223456789*0#, it is still accepted and the phone resets.

How do I access my Cisco IP Phone web interface?

How do I connect my Cisco VoIP phone to my computer?

How do I browse on a Cisco phone?

To access the phones Web GUI follow the below steps.

  1. On the front of the phone press the Cog button to access the settings.
  2. Go to Network Configuration.
  3. Go to IPv4 address settings.
  4. Change the Connection Type so you can see Static IP.
  5. Take note of the Static IP address (this is what will be used to access the web GUI).

How do I connect my phone line to my computer for a call?

How to Connect a Telephone to a PC

  1. Telephone line jack. Locate the end of the telephone cord. Video of the Day.
  2. Telephone USB. Connect the telephone cord jack to the USB telephone adapter.
  3. USB port. Plug the USB into your computer’s USB port.

How do I reprogram my Cisco phone?

Factory Reset Cisco IP Phone 7841 (Using Keypad)

  1. Unplug the phone’s LAN cable.
  2. Wait 5 seconds.
  3. Press and hold # button while plugging the phone back in.
  4. Release the # button when the light on the handset blinks red 2 times.
  5. Press 123456789*0# in sequence.
  • September 16, 2022