How do I log into my Polycom VVX 411?

How do I log into my Polycom VVX 411?

Sign-in via Polycom Web Sign-In

1. Select Web Sign-in on the device.
2. A unique nine-digit code will be generated with a URL.
3. Open a browser on your computer and type in the address as indicated on the device.
4. Enter your email address in the verification box on the site.
5. Enter the code on the device into the Device Login Screen.

How do I register for Polycom?

Manually Registering a Polycom Phone

1. Log into the phone’s admin page using the phone’s IP in your computer browser.
2. Go to the Simple Setup menu.
3. Scroll down to the SIP Server section.
4. Expand the SIP Server section.
5. In the Address field, fill in the phone system full name.
6. In the Port field, input the SIP port 5060.

How do I access the GUI on my phone?

To access the phones Web GUI follow the below steps.

1. On the front of the phone press the Cog button to access the settings.
2. Go to Network Configuration.
3. Go to IPv4 address settings.
4. Change the Connection Type so you can see Static IP.
5. Take note of the Static IP address (this is what will be used to access the web GUI).

What is the password for Polycom Web Configuration Utility?

456
To log in to the Web Utility, you’ll need the IP address of the phone you wish to configure, and your user and/or administrator credentials, depending on how you wish to log in. The default Administrator password is: 456.

How do I log into my yealink web interface?

How to access the GUI.

1. Press the ‘OK’ button on your Yealink desk phone and take note of the IPv4 address.
2. Then go on to a computer connected to the same internet connection, open up a browser and enter the IP address in the URL bar and press enter.
3. You will then be prompted for a username and password.

How do I enable the interface on Cisco 8861?

How to access the web interface of Cisco 8861 or 7841 phone?

1. Press the Settings button.
2. Select Status.
3. Select Network Status.
4. Select either IPv4 Status or IPv6 Status, depending on which is used.
5. Note the IP Address.

How do I log into my VOIP phone?

Open your web browser and enter the IP address on the address bar: Some phones require a secure connection to your network before the web interface can be accessed. Use https:// if entering the IP address to the address bar does not load the page.

How do I enable Web access on my Cisco phone?

Resolution

1. Use Internet Explorer browser.
2. Ensure that the phone is connected to the same network as the computer. Plug the phone directly to the router where the computer is connected to.
3. Check if the web interface of the Cisco phone is enabled. Setup Key > Network > Enable Web Server = YES.

How do I reset my spectralink 8440?

While the phone is booting cancel the startup process by pressing the “Cancel” soft key. Once you see the “Welcome!” countdown screen, press and hold 1 3 5 all at the same time. Enter the phone’s MAC address as the reset password, and the phone will be restored to factory defaults.