How do I know what size chain for my Husqvarna chainsaw?

How do I know what size chain for my Husqvarna chainsaw?

To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.

What size chain is on a Husqvarna?

Husqvarna 16-in 56 Link Replacement Chainsaw Chain in the Chainsaw Chains department at Lowes.com.

Will an Oregon chain fit a Husqvarna?

Chainsaw Bar & H78 Chain, Fits Husqvarna, Poulan, Makita, Craftsman, Jonsered, McCulloch and more (577330) This product is only available through retailers or servicing dealers.

How do I know what size chain I have?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

Can I use a Stihl chain on a Husqvarna bar?

Husqvarna uses as a standard driver width . 058 and Stihl uses . 063, so the Stihl chain won’t fit into the Husqvarna bar groove.

Can you use Stihl chain on Husqvarna?

How do I know what size bike chain to buy?

Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.

How do I know what chainsaw chain to buy?

When choosing a chainsaw chain, you first need to know the pitch, the gauge and the number of drive links. Once you have these, everything else about the choice is basically about what you prefer. Pitch is the average distance between two rivets on the saw chain.

Can I put an Oregon chain on a Stihl bar?

Oregon R55 AdvanceCut Chainsaw Chain for 16-Inch Bar -55 Drive Links – low-kickback chain fits several Stihl models. This product is only available through retailers or servicing dealers. Designed to fit most chainsaw models that require a 3/8 Inch low-profile pitch, .

What size file do I need for a 325 chain?

File sizes

Will a Oregon chain fit a Stihl bar?

Oregon R55 AdvanceCut Chainsaw Chain for 16-Inch Bar -55 Drive Links – low-kickback chain fits several Stihl models. This product is only available through retailers or servicing dealers.