How do I factory reset my Anviz EP300?

How do I factory reset my Anviz EP300?

How to reset the Anviz EP300 to the factory settings

1. Connect device with pc.
2. Open communication software.
3. ‘Add device’ > ‘Synchronise time’ > ‘Initialise device’

What is CrossChex standard?

CrossChex is access control and time & attendance management software solution | Anviz Global–Powering a Smarter World.

How do I reset my Anviz?

How to factory reset Anviz L100 DII

1. Remove the unit’s battery cover.
2. there is a pin hole on the right of the unit.
3. press and hold the pin down for 3-5 seconds.
4. your device should be factory reset.

How do I reset my Anviz attendance machine?

We can do this through software : (1) Connect device with pc. (2) Open communication software. (3) “Add device” ->“Synchronize time”-> “Initialize device”(NOTE: if you want the datas in the device, pls back up all the datas first.)

How do I reset my Anviz biometric?

Can not connect to the TA machine?

If the WiFi icon shows a problem, check that your router is still active and that the WiFi password has not been changed. If everything seems correct on the device, try and ping the IP address of the TA device from a PC on the network.

How do I reset my biometrics password?

Note: Master Password reset with biometrics is also available for the new Safari app….If you have 2FA or U2F enabled, you must also enter the code from your authenticator app or use your U2F key.

1. Tap reset your Master Password.
2. Authenticate with biometrics.
3. Choose a new Master Password and recover your account.

How do I fix unable to connect?

If restart your computer doesn’t help, you can try the following methods.

1. Use Internet Connections troubleshooter.
2. Reset your network adaptor and TCP/IP.
3. Release and renew your IP address.
4. Update your network adapter driver.
5. Turn off your firewall/antivirus software.

How do I change my biometrics administrator?

Click on [Menu] button. If have at least one administrator, you will have to authenticate with the fingerprint or password to get into the menu. Use [Up]/[Down] buttons to select “User Management” and press [OK] button. Use [Up]/[Down] buttons to select “Enroll Admin” and press [OK] button.

How do I factory reset my Zkteco?

If you’re unable to see the device when when doing a search to add the S922, reset the device by using a paperclip to depress the reset button at the back of the device (see image) while the ethernet is connected. This will re-assign an IP address in range of your network.

How do I hard reset my biometrics?

How to Reset a Fingerprint Reader

1. Click the “Start” button and then the “Control Panel” link.
2. Type “Biometrics” in the Control Panel Search box, and then click the “Biometric Devices” option.
3. Click the “Change Biometric Device Settings” option, and then click the “Biometrics Off” radio button.

How do I reset my Zkteco admin?

3. How to Reset Admin on ZKTECO Biometric Devices – Using the Time Based Method.

1. Once you are in the Main Screen, Check the Time on the Screen.
2. Take a Calculator and deduct the time by “9999”
3. Now on the fingerprint device Press Menu.
4. Enter “8888”
5. Press OK.
6. Enter the Super Password and click ok.

How do you reset network settings on iPhone?

Reset your Network Settings Go to Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.

How do you reset VPN on iPhone?

Stored VPN info (e.g., password, server name, VPN type, etc.) is deleted.

1. From a Home screen, navigate: Settings. General. Transfer or Reset iPhone. .
2. Reset. .
3. Reset Network Settings. . If prompted, enter your passcode .
4. Reset Network Settings. .

How do I reset my wifi router?

How to Reset a Router

1. Keep your router plugged in.
2. Find your router’s reset button. This will be on the back or the bottom of your router.
3. Use a paperclip to hold down the reset button for 30 seconds.
4. Release the button.
5. Wait for the router to power back on.