How do I enable FTP on ASA firewall?
Table of Contents
How do I enable FTP on ASA firewall?
Cisco ASA FTP Procedure
- Connect to the firewall > Go to enable mode > Go to Configure terminal mode > Create an object for the FTP server > redirect all FTP Traffic to that object.
- Then allow the FTP traffic in from outside.
What is FTP passive mode?
Passive FTP is an FTP mode that can be requested by a client to alleviate the issues caused by client-side firewalls. Both the server and the client must support passive FTP for this process to work. When passive FTP is used, the client will initiate the connection to the server.
How do I allow passive FTP through firewall?
Step 1: Open Start > Settings > Control Panel > Firewall. Step 2: Add the TCP ports 5001-5008 to the firewall exception list. Now you should be able to connect to ftp server with passive transfer mode.
How do I enable FTP on a Cisco switch?
Type “ftp-server enable” on the command line of the terminal, followed by the “Enter” key to enable server capability.
How do I open port 21 FTP?
To open ftp port 21 you need to change windows firewall settings. Add port 21 and 20 and save the firewall (see above two figures). Save firewall by clicking on Ok button. You are done now your Windows XP box will allows incoming FTP connection.
How do I enable FTP on my router?
To set up FTP access through the Internet:
- Launch an Internet browser from a computer or wireless device that is connected to the network.
- Enter the router user name and password.
- Select ADVANCED > USB Storage > Advanced Settings.
- Select the FTP (via Internet) check box.
- Click the Apply button.
How do I know if my FTP port 21 is blocked?
Here’s how to check whether or not there’s a blockage in FTP port 21:
- Open the system console, then enter the following line. Make sure to change the domain name accordingly.
- If the FTP port 21 is not blocked, the 220 response will appear.
- If the 220 response doesn’t appear, that means the FTP port 21 is blocked.
What is the problem with active mode FTP connection?
The main problem with active mode FTP actually falls on the client side. The FTP client doesn’t make the actual connection to the data port of the server–it simply tells the server what port it is listening on and the server connects back to the specified port on the client.
