How do I connect my TSC printer to my Mac?

How do I connect my TSC printer to my Mac?

Open the Mac System Preferences and choose the Print & Scan section. Click the + button below the list of installed printers. In the list of connected printers, select the TSC printer, wait for the printer driver to be located, then click Add in the lower right corner of the dialogue.

How do I connect my TSC label printer to my computer?

Setup

1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the provided USB cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer, and then plug the power cord into a properly grounded power outlet.

How do I install TSC printer drivers?

Place the TSC software CD disk in your PC or laptop’s CD drive and then click “Windows Driver Setup” on the AutoRun screen. The DriverWizard will be start and will display the model number of the identified printer. Follow the Wizard to complete the TSC driver installation.

How do I print from labels on a Mac?

Step-by-step instructions for Chrome, Firefox, and Safari:

1. Buy the label and click the “Print Label” button.
2. At the top of the popup, select the 4×6″ label format.
3. You’ll see a label preview if you’re using a web browser that supports it, like Chrome.

How install ProLabel Express on Mac?

Stamps.com ProLabel Express Mac Driver Installation

1. Download the ProLabelExpressMacDriver folder here: https://resources.stamps.com/cc/drivers/prolabelexpressmacdriver.zip.
2. Open the folder, click on ProLabelExpressMacDriver.
3. In the same folder, open the Stamps.com ProLabel Express Mac Driver Install.

How do I fix printer not responding on Mac?

Reset the printing system on your Mac to solve a problem

1. On your Mac, choose Apple menu > System Preferences, then click Printers & Scanners .
2. Press and hold the Control key as you click in the list at the left, then choose “Reset printing system” from the menu that appears.
3. Re-add any printers.

How do I update the firmware on my TSC printer?

How do I use TSC Console to update firmware?…

1. Click the checkbox to select the desired printers.
2. Click “Tools” then “File Manager Tool” option to access the File Manager page.
3. Reclassify the file type as “Firmware File”
4. Press “Browse” to select Frimware File.
5. Press “Download” to update firmware.

How do I print 4×6 labels on a Mac?

1) Buy the label and click the “Print Label” button. 2) At the top of the popup, select the 4×6″ label format. 3) You’ll see a label preview if you’re using a web browser that supports it, like Chrome. In Chrome, put your mouse over the label preview and click the little printer icon on the top right.

How do I install Stamps Com ProLabel Express USB printer?

How to Install your Stamps.com ProLabel Express USB Printer

1. Connect your printer to your computer with the provided USB cable and power it on.
2. Click Next again to accept the installation directory.
3. Leave the boxes checked and click Finish.
4. Choose the option to Install printer drivers and click Next.

How do I set my printer to 4×6?

Make sure the correct printer is selected, then click the Properties button. Make sure the Orientation is set to Portrait, then click Advanced. Here make sure the Paper Size is set to 100x150mm or a 4×6″ option. Click Ok.