How do I clean my Brother MFC 9330cdw printer?

How do I clean my Brother MFC 9330cdw printer?

Clean the drum unit

  1. Make sure the machine is in Ready mode.
  2. Press. (Settings).
  3. Press All Settings.
  4. Press the Up or Down arrow key to display Print Reports.
  5. Press Print Reports.
  6. Press the Up or Down arrow key to display Drum Dot Print.
  7. Press Drum Dot Print.
  8. The machine’s display will show Press [OK]. Press OK.

How do I clean my Brother MFC printer?


  1. Press Settings.
  2. Press or to select the following: Select [General Setup]. Press OK. Select [Maintenance]. Press OK. Select [Print Head Cleaning]. Press OK. Select [Black only], [Colour only], or [All]. Press OK. Select [Normal], [Strong], or [Strongest].
  3. Press . The machine cleans the print head.

How do you reset the drum on a Brother MFC 9330CDW?

When you replace a drum unit with a new one, you must reset the drum counter by completing the following steps:

  1. Press Cancel to interrupt the error.
  2. Press Settings.
  3. Press All Settings.
  4. Swipe up or down or press the Up or Down arrow key to display Machine Info.
  5. Press Machine Info.
  6. Press Parts Life.

How do I reset my Brother MFC 9330CDW?

Brother MFC-9330CDW – Reset Toner Cartridge

  1. Ensure the printer is switched on.
  2. Open the printer lid to reveal the toner cartridges.
  3. Press and hold the Asterisk key for five (5) seconds.
  4. The LCD should display a new menu.
  5. Select the cartridge you wish to reset, K = Black, C = Cyan, M = Magenta, Y = Yellow.

How do I fix my blurry Brother printer?

When printing documents the characters appear ghosted, blurry, or doubled.

  1. Prepare a lint free cloth such as a T-shirt, DRY eye glass cleaner cloth, DRY monitor cloth or wash cloth.
  2. Unplug your Brother machine from the AC power outlet (electrical socket).
  3. Open the scanner cover.

Why is my Brother printer streaking?

This issue is usually caused by foreign material inside the machine (paper dust, glue from labels or envelopes, paper clips, staples, etc.) sticking to or damaging the surface of the drum. This is typically resolved by cleaning and/or replacing the drum unit.

Can you clean printer roller with alcohol?

If your printer won’t grab paper or your notice toner smudges on paper, it’s time to whip up some magical printer roller cleaner — rubbing alcohol applied with a clean cotton cloth!

  • September 26, 2022