Is the 3750X a layer 3 switch?
Table of Contents
Is the 3750X a layer 3 switch?
The Cisco 3750-X has been announced as the end-of-sale and end-of-life. Cisco announced the EOS and EOL dates for the Cisco Catalyst 3560-X and 3750-X Series Switches in October, 2015.
Is Cisco 3750X PoE?
Cisco WS-C3750X-48PF-S Catalyst 3750X 48 Port Full PoE, Refurbished, Original. The Cisco Catalyst WS-C3750X-48PF-S switch is an enterprise-class managed switch that offers 48 Gigabit Ethernet PoE+ ports (30 Watts on each port) as well as stacking capabilities.
Is a 3750G a layer 3 switch?
The 3750G is a layer 3 switch and only does static routes to the outside.
How do I enable Layer 3 on a Cisco switch?
Configuring the Layer 3 Interfaces
- Navigate to the Distribution Switch’s details page from Monitor > Switches.
- Click Initialize layer 3 under the Status section.
- Enter the following settings: Name: Uplink. Subnet: 192.168. 128.0/24. Interface IP: 192.168. 128.1. VLAN: 20. Default Gateway: 192.168. 128.254.
- Click Save.
Do I need a license for a Cisco switch?
Base license levels for a switch are indicated by the switch model number. They are always permanent licenses, without an expiration date. Add-on license levels provide Cisco innovations on the switch, as well as on the Cisco Digital Network Architecture Center (Cisco DNA Center).
What is the difference between layer 3 switch and router?
Generally speaking, a layer 3 switch connects hosts to form local area networks (LANs) while routers connect multiple LANs into wide area networks (WANs).
Can a Layer 3 switch be used as a router?
A layer 3 switch is both a switch and a router: it can be regarded as a router with multiple Ethernet ports and with switching function. layer 3 switch enable packets switching by inspecting both their IP addresses and their MAC addresses.
How do you set up a Layer 3 interface?
Note Before you can configure physical Layer 3 interfaces, you must enable IP routing if IP routing is disabled, and specify an IP routing protocol….Configuring Physical Layer 3 Interfaces.
| Command | Purpose | |
|---|---|---|
| Step 1 | Switch(config)#ip routing | Enables IP routing (Required only if disabled.) |
