How do I use my Cisco landline phone?

How do I use my Cisco landline phone?

1. Procedure.
2. Step 1 Verify that you are on an active call (not on hold).
3. Step 2 Press and release the hookswitch to get a dial tone.
4. Step 3 Enter the transfer recipient’s phone number.
5. Step 4 Wait for the recipient to answer. You may skip to Step 5 while the call is ringing.
6. Step 5 Hang up. The transfer is complete.

How do I setup speed dial on my Cisco IP Phone 7841?

Speed dial Enter a speed-dial item number and press the SpeedDial softkey. Or, press the down arrow on the Navigation bar when the phone is idle, then scroll to a speed-dial item and press the round Select button in the Navigation bar.

How do you call on a Cisco IP phone?

Place a Call Dial four-digit extension and then lift the handset. To place a call to an outside number: Lift handset and dial 9 and then 1 and then the number with the area code.

How does Cisco IP phone work?

Users of an VoIP phone system simply plug their IP phone into the nearest LAN port. Then, the IP phone registers automatically at the VoIP phone system. The IP phone always keeps its number, and behaves exactly the same way, no matter where you plug it in – on your desk, in the office next door or on a tropical island.

How do I connect to an IP phone?

IP phones connect directly to an internet connection and do not require an adapter. Adapters are used to connect a regular analog phone to your VoIP service. Use the Ethernet cable that came with your IP phone to connect an available LAN port on your router to the LAN port on your phone.

How do you speed dial on a Cisco IP phone?

Configuring Speed-Dial Hot Keys

1. Choose Menu > Directory > Phone Book >Speed Dial.
2. Scroll to an available speed-dial hot key and press Detail.
3. Press Edit to enter the information. See the “Entering and Editing Text” section.
4. Press OK to save the speed-dial number.

How do I assign an IP address to an IP address phone?

Procedure

1. Access the web utility (GUI).
2. Log in as Admin.
3. Click Voice > System.
4. Under IPv4 Settings select Static IP.
5. Enter the IP address of the phone.
6. Enter the Gateway address.
7. Enter the Subnet.
8. Enter Primary DNS.

How do you make an outside call from an office phone?

Dial 9 to access an outside line. Dial 1 for domestic calls, or 011 for international calls. Dial the area code for domestic calls, or the country code (and the city code, if required) for an international call. Dial the telephone number.

How do I make a call on Cisco IP Communicator?

Placing a Call​

1. Click the button next to the phone number.
2. Use either the IP Communicators keypad or your laptop/desktop keypad to enter phone number. Non-UM 9+ 1+ 10 digit or 5 digit number.

How do I connect my IP phone?

How do I connect my phone to my router?

What to Know

1. Connect your router to your modem, then plug the phone line into the “Phone 1” or “Tel 1” port on your router.
2. If you have a modem-router combo, just plug the phone line into the “Phone 1” or “Tel 1” port.
3. For DSL modems, you must use an additional telephone cable to connect the DSL port to a wall jack.

How do I set speed dial on my landline?

How do I set up speed dial on my landline phone?

1. Pick up the handset.
2. For the shortlist, press *74 or 74#.
3. Select a 1-digit code (choose from 2 to 9) or a 2-digit code (choose from 20-49).
4. Dial the entire phone number that you wish to assign to your selected code.