How do I setup my Belkin Wi-Fi extender without cable?

How do I setup my Belkin Wi-Fi extender without cable?

Configuring your Belkin wireless router as an access point through the web-based setup page

1. Open a web browser to access the router’s web-based setup page.
2. Go to Wireless > Channel and SSID and configure your AP’s wireless network name (SSID).

How do I connect my PC to wireless Internet?

In Windows 10

1. Select the Network or Wifi icon in the notification area.
2. In the list of networks, choose the network that you want to connect to, and then select Connect.
3. Type the security key (often called the password).
4. Follow additional instructions if there are any.

How do I reset my Belkin Wi-Fi?

Reset Button

1. Locate the “Reset” button on the Belkin router.
2. Push the “Reset” button and then release it to reset the router.
3. Push the “Reset” button and hold it for at least 10 seconds to start the “Restore to Factory Defaults” process.
4. Release the button after the 10-second minimum.

How do I log into my Belkin wireless router?

Accessing the router’s web-based setup page

1. Launch a web browser.
2. Enter “https://router” or the router’s default IP address, 192.168.
3. You will be asked to log in using the router’s admin password. If you have not set a custom password, just leave the Password field blank then click Submit.

How do I connect my PC to a network?

Connect your computer to your home network

1. Click on the Network icon in the bottom right hand corner.
2. Click the desired network in the Wi-Fi list.
3. Click Connect.
4. Enter your Wireless Network Key (passphrase).
5. Click Next.
6. Select the Network Sharing Option you prefer (Yes is normal for home networks).

How do I reset my Belkin router from my computer?

To reset the router using the web interface, you will need a computer or tablet connected to the Belkin device.

1. Open any browser you like (Chrome, Firefox, etc)
2. Log in to your Belkin router.
3. In the Utilities section, go to Restore Factory Defaults.
4. Clicking Restore defaults will factory reset the device.

How do I find my Belkin router IP address?

General Belkin Router Configuration

1. Visit the router’s IP address (http://192.168.2.1) in a new browser window. http://192.168.2.1 is the default Belkin router IP address.
2. Click on DNS under Internet WAN.
3. Enter the router’s password and click Submit.