How do I reset my CONTOUR ascensia meter?
Table of Contents
How do I reset my CONTOUR ascensia meter?
You can turn a meter setting off or on from the meter using the following steps:
- Turn off the meter and move away from your mobile device.
- Turn your meter on.
- Scroll to Settings.
- Press ‘OK’ on each screen until you find the setting to change.
- Use the up and down arrows on the outer ring to change the setting. Press ‘OK’
What is the control solution for Contour Next EZ?
The CONTOUR®NEXT control solutions are aqueous glucose solutions intended for use in self-testing by people with diabetes as a quality control check to verify that the CONTOUR NEXT EZ system is working properly.
What is CONTOUR Plus control solution?
Description. The Contour Plus control solution can be used to practice the use of a meter or to perform a quality assurance test to ensure that the glucometer and test strips are working properly. Control solutions are available in three concentrations: Low, Normal, and High.
Is ascensia part of Bayer?
ABOUT ASCENSIA DIABETES CARE Established in 2016 through the acquisition of Bayer Diabetes Care by PHC Holdings (formerly known as Panasonic Healthcare Holdings), Ascensia Diabetes Care is based on over 70 years of delivering innovative products and solutions that make a positive difference for people with diabetes.
What is Ascensia CONTOUR?
The CONTOUR™PLUS portfolio offers easy-to-use blood glucose monitoring systems with proven accuracy1 that all utilize the same CONTOUR™PLUS test strip technology. A range of features helps people with diabetes to easily incorporate blood glucose testing into their daily lives.
What is the control solution range for contour next?
The CONTOUR NEXT ONE blood glucose monitoring system has a measuring range of 20 mg/dL to 600 mg/dL.
Do you need control solution for glucose meter?
Manufacturers of glucose meters recommend routine use of control solution to ensure accuracy. Previous studies have demonstrated that glucose meters vary in accuracy and that patients are not using control solution as recommended.
How do you use ascensia Microlet?
- Remove the endcap by gently snapping the endcap from top to bottom.
- Rotate (do not remove) the protective cap on the lancet ¼ turn.
- Twist off the protective cap.
- Select the Puncture Depth.
- Place the Microlet 2 device firmly against the puncture site.
- Remove the endcap by gently snapping the endcap from top to bottom.
What is control solution used for?
In order to get the most accurate readings from your monitor, you should make sure that you use control solution. Its purpose is to make sure that your meter is working properly and calibrated correctly. By not using control solution you run the risk of getting blood sugar readings that are not right.
How accurate is Contour Plus glucometer?
Results: Results of fingertip and venous blood glucose measurements by the CONTOUR PLUS system were compared with laboratory reference values to determine accuracy. Accuracy was 98.1% (96.06%-99.22%) for fingertip blood tests and 98.1% (96.02%-99.21%) for venous blood tests.
Who is the CEO of ascensia diabetic care?
Albertraj Balraj – Country Head & Director – Ascensia Diabetes Care ( PHC Holding) – Ascensia Diabetes Care | LinkedIn.
Who is the manufacturer of Contour blood glucose meters?
Bayer Contour
Bayer Contour Plus Glucometer (Blue)
How accurate is CONTOUR blood glucose meter?
Clinical data shows the Ascensia Contour Next ONE meter using Contour Next test strips meets the Food and Drug Administration’s tightened accuracy requirements and that 95 percent of the time, it has the smallest error range within 8.4 mg/dL of reference results, whether the test result is above or below 100 mg/dL.
How do you calibrate a one touch glucometer?
Coding Your Meter:
- Check the code on the test strip vial before inserting the test strip. Code numbers are used to calibrate your meter with the test strips you are using.
- Insert a test strip to turn on the meter. a. Remove a test strip from its vial.
- Match the code on the meter with the code on the test strip vial.
What is control solution for glucose meter?
Glucose control solution is a liquid made up of water, glucose, buffers, and microbicides. These ingredients are vital to creating a solution with the following properties: Has a concentration of glucose that can be used to test the functionality of your meter and test strips.
Do all glucose meters need to be calibrated?
Glucometers must be calibrated to ensure accurate readings are provided to the person performing the test. While some glucometers can calibrate automatically, most will require the user to manually calibrate.
