Does American Standard make a 10 inch rough-in toilet?
Table of Contents
Does American Standard make a 10 inch rough-in toilet?
American StandardReliant 10 in. Rough-In 2-Piece 1.28 GPF Single Flush Round Toilet in White, Seat Included.
What is the difference between 12 inch and 10 inch rough-in for a toilet?
Different Rough-in Measurements A 10-inch rough-in is the usual measurement installed in older homes. However, the 12-inch measurement is the standard for modern toilet plumbing. Most toilets that you encounter in retail outlets have 12-inch rough-in dimensions.
What is the most common toilet rough-in size?
12 inches
The standard toilet rough-in is 12 inches, but don’t assume you have a 12” rough-in without measuring! Some older homes come with 10” or 14” rough-in sizes. You may also find 10” rough-in sizes in powder rooms, half baths, or other small bathrooms to save space.
How far does toilet stick out from wall?
In general, round-front toilets extend 25 to 28 inches from the wall. Elongated toilets extend 29 to 31 inches.
How do I know the rough-in size of my toilet?
The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).
Does Kohler make a toilet with a 10 inch rough-in?
Highline™ Comfort Height™ Two-piece elongated 1.28 gpf chair height toilet with 10″ rough-in.
Does Glacier Bay make a 10 inch rough-in toilet?
The Glacier Bay 10 in. rough-in 2-piece 1.28 GPF High-Efficiency Elongated Toilet in White is manufactured from durable vitreous china which is resistant to stains, acid and abrasions for long-lasting beauty.
How do you measure toilet rough in distance?
What does 12 inch rough-in mean?
12-inch Rough-in Toilet. If you’re not familiar with the term “rough-in,” the experts at PlumbersStock explain that it’s the location where the water outlet is (in most cases) beneath the toilet. The actual rough-in measurement is the distance between the center of this outlet to the wall facing the back of your toilet …
What is a 10 inch rough-in?
The actual rough-in measurement is the distance between the center of this outlet to the wall facing the back of your toilet. Toilets are manufactured in one- and two-piece styles, and the standard measurement for both cases is a 12-inch rough-in. There are also 10-inch and 14-inch rough-ins, but these are less common.
What is rough-in distance for toilet?
In general, the toilet rough-in distance is 12″ from the center of the toilet flange to the back wall for a typical toilet. There should also be a minimum of 15″ from the centerline of the toilet to any wall or object on either side of the toilet.
How is toilet rough-in distance measured?
