Who makes Russell evaporators?
Table of Contents
Who makes Russell evaporators?
Innovations. Trusted since 1946, Russell manufactures a complete line of commercial refrigeration equipment and solutions—energy-efficient unit coolers, condensing units, condensers, air handlers, coils and packaged systems—to match any refrigeration requirement. Part of the Rheem family of brands.
What is meant by condensing unit?
condensing unit means a component of a ”central air conditioner” which is designed to remove heat absorbed by the refrigerant and to transfer it to the outside environment, and which consists of an outdoor coil, compressor(s), and air moving device.
What is minimum condensing temperature?
The Standards require that the minimum condensing temperature at the refrigeration condenser shall be 70°F or less.
How do you calculate a condenser split?
In air-cooled condensers, the temperature difference between the ambient and the condensing temperature is referred to as the condenser split. For example, if the condensing temperature is 110 degrees F and the ambient is 80 degrees, the condenser split would be 30 degrees.
What size condenser unit do I need?
Step 5: Match your square footage to an HVAC size chart
| Home Sq Footage | Air Conditioner Size (tons) |
|---|---|
| 600 – 1,000 square feet | 1.5 tons |
| 1,000 – 1,500 square feet | 2 tons |
| 1,500 – 2,000 square feet | 3 tons |
| 2,000 – 2,500 square feet | 4 tons |
How do you size a condenser unit?
How to Determine a Condensing Unit Size
- Find the air conditioner’s condensing unit outside the home.
- Look on the exterior of the condensing unit for its data plate.
- Find and record the compressor’s rated load amperage (RLA).
- Divide the RLA by 5 if it’s a newer unit.
How hot should a condenser get?
Safe Temperature Range It’s normal for this temperature to be as high as 300 degrees Fahrenheit, but it should never be higher. If the temperature rises to 320 degrees, the refrigerant will start to break down. If it gets hotter than 350 degrees, the lubricating oil inside the compressor will start degrading.
What is the normal condenser split?
25 degree to 30 degree
In this article we will discuss a standard-efficiency condenser that normally runs a 25 degree to 30 degree split. Note that condenser splits are not affected by ambient temperature changes.
What is a good condenser split?
The higher the efficiency, the more coil surface area there will be, thus the lower the condenser split will be. In this article we will discuss a standard-efficiency condenser that normally runs a 25 degree to 30 degree split. Note that condenser splits are not affected by ambient temperature changes.
What size house will a 2.5 ton AC unit cool?
For example, a 30,000 BTU, 2.5-ton air conditioner is made to effectively cool a home between 1,200 and 1,500 square feet. A slightly larger 3,600, 3-ton unit, is designed for homes that are 1,500 to 1,800 square feet.
Can you replace just the condenser?
Your Condenser Unit Could Solely Be to Blame for a Broken AC Don’t lose all hope just yet though! A common question we get is if you can replace just the condenser. The short answer is yes, you can. Some technicians often do in some cases.
What is the maximum operating temperature for the R-series condensing unit?
The standard R-series condensing unit is designed for operation in ambient air temperatures up to 110°F. Oversized condensers are available for most models. Contact our Applications Engineering department for requirements exceeding 110°F ambient temperature.
What type of condensing unit is used in a restaurant?
DUAL REFRIGERANT AIR COOLED CONDENSING UNITS Description Features Minicon R-series condensing units are ideally suited for use in a variety of commercial applications such as cafeterias, convenience stores, restaurants and fast food outlets.
What are the specs of a Minicon R series condensing unit?
R Series Publication No. RU-REL-0413A 4 to 6 HP 1/2 to 3 HP 2 DUAL REFRIGERANT AIR COOLED CONDENSING UNITS Description Features Minicon R-series condensing units are ideally suited for use in a variety of commercial applications such as cafeterias, convenience stores, restaurants and fast food outlets.
What are the different types of R-series condensers?
The standard R-series condensing unit is designed for operation in ambient air temperatures up to 110°F. Oversized condensers are available for most models. Contact our Applications Engineering department for requirements exceeding 110°F ambient temperature. Indoor/Outdoor Models (REH/RES/RED/REO) • Hermetic, Semi-hermetic or Scroll compressor.
