What is port network in Avaya?

What is port network in Avaya?

A PN uses combinations of gateways to provide physical ports and interfaces for handling calls. A port network can be one of the following: G650 Media Gateway. A stack of G650 Media Gateway that is connected with a TDM bus cable and shares connections with the server or port circuit packs.

What is IPSI in Avaya?

IP Server Interface (IPSI): This is a card in a G650 Media Gateway that directly communicates with the Avaya Communication Manager Server. Control / Customer LAN (CLAN): This is a card in a G650 Media Gateway and is the interface that all IP Stations and IP Trunks register / connect to.

What port does Avaya IP Office Manager use?

IP Office Release 11.1 Ports

System Direction External Device
IP Office Ingress Web Management client
IP Office Ingress Web Management client. Upgrade.
IP Office Ingress H.323 phone
IP Office Ingress Web Management client

What is IPSI clan and MedPro?

IPSI are the cards used to communicate with Communication Manager in a G650 port network. Medpro are DSP resources used in G650 port networks.

How do I configure my Avaya IPSI card?

IPSI Board TN2312AP/BP

  1. Install IPSI board into Gateway/Cabinet if new install.
  2. Configure your laptop’s Ethernet port to 192.11.13.5 and 255.255.255.252.
  3. Connect laptop via Cross-Over Cable to Services port on front of IPSI board.
  4. On your laptop, select Start, Run, and then type cmd in the space and hit enter.

What is AAR analysis?

Communication Manager compares dialed numbers with the value of the Dialed Strings field and determines the route pattern for the dialed number.

How do I log into Avaya IPSI?

avaya.dwalin.ru

  1. disable any session to IPSI: ipsisession -d -c 01A (01A – replace with your IPSI)
  2. enable session to IPSI: ipsisession -c 01A (01A – replace with your IPSI)
  3. copy password that was created.
  4. access to your IPSI: ssh init@ipsi-a01a. respone to the “yes/no” question by typing “yes”.

How do I connect my Avaya phone to Ethernet?

Remove the Ethernet Cable (that is not connected to your computer) from your old phone or find the Ethernet cable that has been provided for you on your desk. 2. Plug the Ethernet Cable into the back of the phone as shown below. It must be plugged into the top port and has this symbol near it.

What is golden IPSI in Avaya?

Golden IPSI is not restricted to PN1. You can install or move to any PN. It can be the Standby IPSI while another IPSI in the same PN is active. Licensed devices also include media-gateways. You could completely remove your IPSI cabinet hardware and swap serial number for the license to a media-gateway serial number.

  • October 21, 2022