How much does ARB Bullbar steel weigh?

How much does ARB Bullbar steel weigh?

The ARB Large Tube Deluxe bull bar is well over 80kgs. The smaller Deluxe bull bar is around 65-70kgs.

What winch will fit an ARB Bullbar?

The ARB winch bar for the 75 Series will fit the low mount 9000lb, 9500lb and 12000lb winches as well as the 8000lb high mount.

How thick are ARB bull bars?

2.6mm
ARB bull bars are made with strong, 2.6mm wall thickness tubing. The tube is cut to the desired length and bent with a CNC Eagle internal mandrel bender ensuring consistency, accuracy and an even wall thickness across all sections.

Can you mount a winch to a bull bar?

A bull bar would not have sufficient strength to be used as a winch mount. Your best bed would be to install a front mounted receiver like part # 65062 and use a winch mounting plate like part # C31010.

How much does an ARB alloy bull bar weigh?

The average weight of an East Coast Bullbar is approximately 35kg (a steel bar is approximately 80kg). The majority of ARB’s bullbars, however, are steel.

Where are ARB bull bars manufactured?

Melbourne, Australia
ARB Bull Bar Manufacturing From a flat sheet of steel, experience every stage of our state-of-the-art factory in Melbourne, Australia, and take a unique look at the effort, passion and attention to detail required to build the world’s best 4×4 protection equipment.

Do I need to upgrade suspension after fitting a bullbar?

SUSPENSION OVERLOAD This means it’s highly recommended that you get a suspension upgrade after or at the same time as you get accessories like bull bars, canopies, winches, drawers or long-range fuel tanks fitted.

Can you fitting a winch to a non winch bull bar?

You can cut up a non-winch bar to fit a winch, but I would just add a thick backing plate to mount the winch on to spread the load. The non-winch bars aren’t rated so if they failed on you under load there would be some hard questions to answer!

Can you fit a winch to a non winch bar?

How heavy is a TJM bullbar?

This TJM Outback bull bar is 4×4 equipped with a integrated steel winch-mount, integrated rated recovery points, reinforced Hi Lift jack points, LED combination lights, plus optional fitment of LED fog lights….SKU.

Are ARB bull bars made in Australia?

ARB Bull Bar Manufacturing From a flat sheet of steel, experience every stage of our state-of-the-art factory in Melbourne, Australia, and take a unique look at the effort, passion and attention to detail required to build the world’s best 4×4 protection equipment.