How do I set my GE dehumidifier to continuous?
Table of Contents
How do I set my GE dehumidifier to continuous?
Humidity Set Control Pads To set the unit for continuous operation, press the ▼ pad until the screen reads NS. NOTE: If NS (Nonstop) is selected, the dehumidifier will operate continuously at its maximum dehumidification settings if attached to a hose to drain or until the bucket is full.
How do you troubleshoot a GE dehumidifier?
If your dehumidifier is not collecting water, the unit is not operating properly: Try resetting the dehumidifier by disconnecting power to the unit for 30 seconds and re-connecting the power. Then, set the control settings and see if the unit operates properly.
How do I reset my GE dehumidifier after cleaning the filter?
Dehumidifier – Air Filter
- Remove the bucket.
- Remove the filter according to the instructions in the Owner’s Manual.
- Clean the filter with warm, soapy water.
- Rinse well and allow it to dry completely before replacing.
- Reset the filter reminder timer by pressing the Filter pad or button for 3 seconds.
What should I set my GE dehumidifier to?
The optimal relative humidity level is between 30 and 50 percent, according to Energy Star (and 30 to 40 percent in colder areas during heating season). If the humidity is higher than that, it can breed dust mites, mildew, and mold, and trigger allergies.
Why does my GE dehumidifier keep stopping?
If your dehumidifier keeps shutting off, the sensor may not be reading the humidity level correctly, resulting in the unit shutting off before reaching the desired level. Some dehumidifiers also have a thermistor that works with the sensor which can also be faulty.
Is there a reset button on GE dehumidifier?
Broadly speaking, dehumidifiers from major manufacturers do not have reset buttons, though your particular brand may have one. A lack of a designated “reset” button does not mean the appliance cannot be rebooted; the procedure often involves simply disconnecting the power.
What would cause a dehumidifier to stop working?
The culprit could be a dirty fan or a broken fan blade. If comfortable checking inside the unit, unplug it and then remove the cover, then turn the fan blade by hand to see if either debris or a broken blade is keeping the fan from turning.
What is the best temperature for a dehumidifier?
between 70 and 90 degrees F.
Ideal Dehumidifier Operating Temperatures. The ideal operating temperature for refrigerant dehumidifiers is between 70 and 90 degrees F.
What is the best setting for dehumidifier?
The best setting for a home dehumidifier is between 30 and 50%, though most people will find comfort at a 45% humidity level. There are challenges when there is too much humidity in the air, as well as when there is not enough humidity in the air.
How long do GE dehumidifiers last?
five to 10 years
Maintain Your Appliance The lifetime of dehumidifiers usually ranges from five to 10 years. To maximize the lifetime, it’s important to care for your dehumidifier. Be sure to regularly change the air filters, clean the condensing coils and exhaust grilles, and empty and clean the water bucket.
Why won’t my GE dehumidifier turn on?
If the control board is defective, the dehumidifier will not run. The humidity sensor monitors the level of moisture in the air. When the moisture level is too high, the contacts in the humidity sensor close to allow the dehumidifier to run. If the humidity sensor is defective, the dehumidifier will not run.
Why won’t my GE dehumidifier stay running?
