How do I record audio from my phone to my amp?

How do I record audio from my phone to my amp?

For an android phone: Plug a 3mm male to male cord in the headphone out on the amp. Plug the other end of the male to male 3mm into the headphone side of a 3mm audio splitter. Open the recording software that comes with your phone. Plug in the male jack from the splitter (need a 3 ring male) into the phone.

Can you connect mic to Amplifier?

Any microphone is cable of connecting with an amplifier. An amplifier (amp for short) is commonly used in conjunction with musical instruments, such as electric guitars and keyboards, although it is possible to hook up other devices to the speaker, including a microphone.

How do I set audio output as mic input?

Right-click the device and select the ‘default device option’ to ensure it is the default speaker or output device. Select the ‘reporting’ tab, which is next to your ‘playback’ tab. Right-click the device and select the ‘default option’ to ensure that the mic you wish to use is the default mic.

Can I record through my headphone jack?

Because the audio is redirected via the cable, this method can also be used in recording audio from Android or Mac or any device with the audio jack in 3.5mm. You just need to get the audio jack removed from the headphone slots and then insert it to the headphone slot on other devices.

Can you use mic in as line in?

Although it is possible to use them and it won’t harm your mic, there is not enough gain to amplify the microphones level to a line input. If the device the microphone is being connected to is only line level, you will need to connect your mic to a preamp then connect the preamp to the line input.

How do I record with headphone socket?

One audio jack at the end of the audio cable must be inserted to headphone, while the other end must be inserted to the microphone slot on your computer. Once this operation is done, that means the output audio will be redirected as the input audio. Then any audio can be recorded as you need from the microphone.

Can you plug a microphone into RCA?

Use an RCA cable with two phono-to-XLR converters (something like this) and plug them into two of the mic/line inputs on your amp. You’ll need to set both the inputs separately, but this will give you a true stereo input (true stereo output will depend on your amp’s panning capabilities in any).

What is a mic amplifier circuit?

Simple Microphone (MIC) Amplifier Circuits. The first one is a single transistor simple microphone circuit, very simple to hook up using an electret microphone or MIC and an audio amplifier. Typically the 10K resistor within the microphone’s positive port offers this specific vital voltage for the procedure.

How to record audio and microphone sound at the same time?

Step 1. Swipe down the function tab on the top of your screen and find a tile labeled “Screen recorder” sitting on the second page. Step 2. Long-press it to go to the “setting” tab and select “System audio and microphone sound” as the sound settings. Step 3. tap the “Start recording” button to record audio and mic at the same time.

What is a dynamic microphone amplifier?

This second design is a very handy little dynamic microphone amplifier circuit for amplifying weaker audio signal coming from a capacitive condenser microphone. You may use this kind of dynami MIC amplifier circuit for audio sensing purposes and several programmed robotic receptors.

How do you hook up a microphone to a circuit?

The first one is a single transistor simple microphone circuit, very simple to hook up using an electret microphone or MIC and an audio amplifier. Typically the 10K resistor within the microphone’s positive port offers this specific vital voltage for the procedure.