How do I fix a SATA hard drive not detected?
Table of Contents
How do I fix a SATA hard drive not detected?
Therefore, you can try below two ways to make computer detect and read your ATA or SATA hard drive right away:
- Reconnect the hard drive with the data cable port or connect ATA/SATA hard drive to another new data cable in PC;
- Connect the hard drive with another desktop/laptop as a second HDD;
Can SATA HDD be repaired?
Without a proper backup, you must get the drive working long enough to recover the data. Fixing a dead SATA hard drive is no different than fixing any other type of hard drive.
Why is my hard drive detected but not showing up?
If your internal hard drive is not showing up, it might be because it is not initialized or it needs formatting. Make sure your disk is properly connected to the motherboard with the SATA cable. Your HDD might also not be visible in Windows 10 due to some BIOS settings.
How recover data from Seagate internal hard disk which is not detecting?
Power off the computer. Open the computer case and remove the data cable from the hard drive….
- Verify Cabling: The cause of non-detection may be faulty cabling.
- Connect in a Second Computer (if available)
- Connect to an External Enclosure (Please verify if the enclosure is compatible with the hard drive).
How do I restore a SATA hard drive?
How to Recover Data from SATA Hard Drive
- Choose the “External Device Recovery” mode to start recovering from SATA hard drives.
- Enable a quick scan and Start. Go to quick scan for SATA hard drive to search for more files.
- Preview and recover lost files from SATA hard drives.
What is SATA mode in BIOS?
Serial Advanced Technology Attachment, also known as Serial ATA or SATA, enables mass storage devices, such as hard drives and optical drives, to communicate with the motherboard using a high-speed serial cable over two pairs of conductors.
Can you recover data from a physically damaged hard drive?
Sadly, DIY options very rarely yield the results users desire and the task of recovering data from a physically damaged hard drive is one that will almost certainly require the drive be removed from its casing. As a result, its owner will most likely need to instruct a professional data recovery company.
