# Do they make a 6 ton air conditioner?

## Do they make a 6 ton air conditioner?

Daikin 6 Ton Light Commercial Packaged Air Conditioner – Two Speed Belt Driven 460V.

What area will a 6kW air conditioner cool?

For a room 30m2 to 45m2, a 5-6kW unit should cool the room; and. For a room 45m2 to 65m2, a 7-8kW unit should cool the room.

How many square feet can a 5 ton AC handle?

2401 – 3000 sf

ZONE 1 ZONE 2
3 Tons 1501 – 1800 sf 1501 – 1850 sf
3.5 Tons 1801 – 2100 sf 1851 – 2150 sf
4 Tons 2101 – 2400 sf 2151 – 2500 sf
5 Tons 2401 – 3000 sf 2501 – 3100 sf

### Do they make a 6 ton heat pump?

Carrier 6 Ton, Heat Pump Indoor Air Handler, 460/3.

How much does a 5 ton package unit cost?

This A/C system should be able to remove 60,000 BTU’s per hour (5.0 tons x 12,000 BTU’s.) A 5.0 TON air conditioner would cost around \$1,980 for the AC unit alone or a total installation cost of \$3,690.

How much does a 10 ton AC unit cost?

AC unit cost:

0.5 ton cooling \$768-\$850
1 ton cooling \$880-\$962
2.5 ton cooling \$1,590-\$1,740
3 ton cooling \$1,760-\$1,920
10 ton cooling \$2,540-\$2,770

## How do I know what size split system I need?

First, calculate the floor area of the room you are going to be heating. Measure the length and width of this space, and multiply them to get the metres squared (m2)….Depending on your ceiling height, you will need to calculate your floor space by the watts below:

1. 2.4m = 150 (watts)
2. 2.7m = 160 (watts)
3. 3m = 175 (watts)

How big does my split system need to be?

Air conditioners are grouped according to their output capacity, and Appliances Online stocks units ranging from 1.65 kW window box air conditioners to 9.2 kW reverse cycle split systems. As a basic starting point, you’ll need a minimum of 1 to 1.5 kilowatts of cooling capacity per 10 square meters of floor space.

What size house will a 5 ton air conditioner cool?

The answer is a 5 ton AC. Most homes from about 2500 to 3000 square feet require a 5 ton air conditioner.

### What is the difference between a split system and a package unit?

A package HVAC unit combines multiple units, such as an air conditioner and heater, into a single unit. The unit is usually placed outside. Split systems, on the other hand, divide each system into its own unit, so your heater and air conditioner are separate.

What size AC do I need for 2800 sq ft?

1,500–2,000 sq/ft = 30,000 BTUs. 2,000–2,500 sq/ft = 34,000 BTUs. 2,500–3,000+ sq/ft = 42,000–60,000 BTUs.

How much is a 5 ton AC unit cost?

This A/C system should be able to remove 60,000 BTU’s per hour (5.0 tons x 12,000 BTU’s.) A 5.0 TON air conditioner would cost around \$1,980 for the AC unit alone or a total installation cost of \$3,690. Top known brands may cost more.

## Can a split system be too big?

Getting a split system air conditioner that is too large is an issue, as the split system will cool down your house or property and then has to turn off before it goes through the proper cycle.

What size AC unit do you need for a 1500 square foot house?

1,201 to 1,500 square feet homes should use 2.5 tons. If your home size is higher than the number above but is less not more than 1,800 square feet, you can go for a three-ton A/C. Choose a unit that is 3.5 tons if your home measures more than 1,800 but not more than 2,100 square feet.

How much is a 5-ton AC?

A 5.0 TON air conditioner would cost around \$1,980 for the AC unit alone or a total installation cost of \$3,690.

### Are split units worth it?

Mini-split systems are a good investment for many commercial structures as well. They allow spot heating and cooling that operates independently of a central system, allowing efficient, economical control for only those occupied areas.

• September 3, 2022