Can you adjust the let-off on a compound bow?

Can you adjust the let-off on a compound bow?

You achieve the increased let-off by increasing the draw length slightly to get further into the valley. Longer draw length means more speed. If you achieve the different let-off by changing cams, like on a Mathews, the 65% let-off is faster than the 80%.

How do I turn off my prime nexus?

The all new Prime R2 Cam System comes with a cable stop that can be easily adjusted to the desired let-off. Loosen Draw Stop screws located on the A side of either cam. Slide the draw stop into the desired position. Tighten screw and repeat process on the other cam.

Can I adjust draw length without a bow press?

All draw length adjustments can be made without the use of a bow press. Draw length changes are made by simply moving the draw stop to the desired position, then rotating the modules accordingly. See draw length settings below. To change draw length, draw stops must be adjusted before the module.

Can draw length be changed on a bow?

Adjustable cams allow the archer to adjust his or her draw length with the use of an hexagonal wrench without, in most cases, pressing the compound bow. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches depending on the compound bow.

What does 80% let-off mean?

it basically means your holding 20% percent of the draw weight at full draw…. for example….a draw weight of 60lbs with 80% letoff means your holding a weight of 12 lbs at full draw…the lower the letoff the more holding weight the higher the letoff the less holding weight….

Are prime bows any good?

The balance, stability and steadiness at full draw make this, and in my experience, other Prime bows a hard choice to beat for bowhunters who put a premium on consistent accuracy in a bow that is pleasant shooting and plenty fast enough for any hunting scenario.

Who makes the Nexus bow?

Prime’s new Nexus 4 proved to be an extremely well-balanced, rock-steady bow in our range testing. Prime’s new-for-2021 Nexus Series of bows features models available in 32-, 34- and 36-inch axle-to-axle lengths, providing a range of IBO speeds and mass weights.

What does bow Letoff mean?

Let-Off. A compound bow uses cables and cams to store energy and reduce the holding weight at full draw. This reduction in holding weight at full draw is called “let-off,” and is calculated as a percentage of the overall draw weight. For example, a 40-pound bow with a 75 percent let-off would be ten pounds at full draw …

What does pounds on a bow mean?

Draw weight, or poundage, is a measurement of the force needed to draw a bow. You might hear someone say, “I shoot a 40-pound bow.” That means their bow’s draw weight is 40 pounds. Every bow has a draw weight.

What does PW mean on a bow?

This reduction in holding weight at full draw is called “let-off,” and is calculated as a percentage of the overall draw weight. For example, a 40-pound bow with a 75 percent let-off would be ten pounds at full draw.

Who owns prime archery?

Why is G5 and Prime Bows soaring to the top of the archery equipment and compound bow market? For that question we provided an inside look at the company and the owners Lou, Nate, and Matt Grace.

  • August 30, 2022