What is the benefit of a twin stick transfer case?

What is the benefit of a twin stick transfer case?

The twin stick shift allows you to override the interlock plunger between axles. This allows you to use 2WD Low range. It also allows you to have front wheel drive only. The Binder Bunch enjoys the ability to switch the transfer case into 2WD Low while four wheeling.

What is a Dana 300 twin stick?

The Dana 300 is a very good recipient for a twin stick conversion. This kit comes with the hardware and instructions required to create a clean and highly functional shifter upgrade.

Why do Jeeps have two sticks?

Generally speaking, Jeeps are equipped with a dual transfer case, meaning a second case is located behind the transmission case and acts to transfer torque to only the rear differential or to the front and rear at the same time.

Can you twin stick a NP231?

While Dana 300 owners can use twin sticks available from several companies, NP231 owners must replace the range fork and sector with new ones from JB Conversions to alter the movement of the internal sleeves of the T-case.

How much power can a Dana 300 handle?

350 horsepower
The Dana 300 has exceptional strength for its size. Worthy believes that a stock Dana 300 can easily handle power ratings up to 350 horsepower and 350 lb-ft of torque, while Novak says they regularly see them handling big-block power and deep compound gearing without failure.

Is there a secret Jeep wave?

So, yes, the ‘Jeep wave’ exists. But fortunately or unfortunately, stopping by the dealership to pick up a new Wrangler doesn’t mean every other Jeep owner will wave at you on the road. And if you own a Jeep and wave at someone, don’t be offended if they don’t wave back — they probably just don’t know any better.

Why do twins stick?

Removing the interlock pins in a stock twin stick allows front wheel drive high or low range. Removing the interlock pins in a converted twin stick allows front wheel drive high range.

How much power can a np231 handle?

According to New Venture Gear, the torque rating of the 231’s three-pinion gearset is 600 lb-ft, and the 241’s six-pinion set can handle up to 1,400 lb-ft.

What did a Dana 300 come in?

Jeep vehicles
The Dana 300 is found in 1980-1986 Jeep vehicles. It is one of the most respected transfer cases and is regarded as the gold standard by casual Jeepers up through the enthusiasts. While only provided in 1/4 Ton rated Jeeps, its strength surpasses this duty.

Does a Dana 300 have PTO?

The biggest difference between the Dana 18 and Dana 300 is the Dana 300’s centered rear output through the port where the power take-off (PTO) was located on a Dana 18.