What is a Toyota blacktop engine?

What is a Toyota blacktop engine?

The final version of the 4AGE engine is called the “Blacktop”, which takes its name from the color of the valve cover. Toyota further increased the compression ratio of the engine from 10.5 to 11:1, and features lighter flywheels, larger intake plenums and lighter connecting rods than the Silvertop.

What is a blacktop engine?

A Blacktop engine is an interference engine unlike all other A series engines. Although the pistons are initially interchangeable physically they aren’t practically as a Silvertop with Blacktop pistons has a very high compression and quite low when the combination is reversed.

Is the 4A-GE a good motor?

The 4AGE is a great engine. You’ll still get at least 30 mpg, which definitely isn’t bad, but the engine alone is not so finicky as to be unable to be driven on the road… remember, in Japan these engines came in a lot of daily driver cars.

What is 7A engine?

Introduction. Toyota’s 7A-FE was a 1.8-litre four-cylinder petrol engine that was produced from 1990 to 2002. Based on the 1.6-litre 4A-FE engine, key features of the 7A-FE engine included its cast iron block, aluminium alloy cylinder head, double overhead camshafts and four valves per cylinder.

How much HP does Takumis car have?

around 240HP
This engine had around 240HP, although it was likely tuned down for road use, and revved at 11,000RPM. It had a displacement of 1587cc and was naturally aspirated.

What is the difference between 4A engine and 7A engine?

The 4A engine series was a 1587 cc (1.6 liter) engine, introduced in 1988, and revised to 4A-FE in 1993; it was mainly used in the Corolla, and was replaced by the ZZ series in the 1998s. The 7A engine series was essentially the same engine, stroked for higher displacement (1.8 liters) and better torque.

Is 7A a good engine?

On average, 7A is a good unit (in addition to the Lean Burn version) with a mileage of up to 300 thousand km.