What does SSL mean on drawings?
Table of Contents
What does SSL mean on drawings?
SSL Drawing Abbreviation
| 1 | SSL | Structural Slab Level Construction, Engineering, Architecture |
|---|---|---|
| 1 | SSL | Structure Surface Level Construction, Engineering, Construction Industry |
What does SSL mean in levels?
1. SSL, FFL, SFL ABBREVIATIONS. • FINISH FLOOR LEVELFFL • STRUCTURAL FLOOR LEVELSFL • STRUCTURAL SLAB LEVELSSL.
How do you calculate finished floor level?
Locate the structural floor height specified in the flooring project plans. Add the combined height of the architectural floor material, substrates and adhesives to the structural floor height. This is the finished floor level.
What is FFL and SSL?
Correct me if Iam wrong, FFL refers to the level at the top surface of floor finish. This is where all the building element finish levels are referenced from. SFL refers to the level at the top surface of the floor screeding or concrete topping. While SSL refers to the level at the top surface of the structural slab.
What does SSL mean in civil engineering?
SSL. Structural Slab Level. Engineering, Architecture, Civil Engineering.
What is FFL and RL?
This RL identifies to the builder the height of the first floor FFL (finished floor level). You’ll notice that if you subtract the smaller number above from the larger one, the space between FFL’s for this building is 3.05m.
How do I get an SSL certificate?
How to Get an SSL Certificate
- Verify your website’s information through ICANN Lookup.
- Generate the Certificate Signing Request (CSR).
- Submit your CSR to the Certificate authority to validate your domain.
- Install the certificate on your website.
What does FFL on elevation mean?
Finished floor level
Finished floor level (FFL) refers to the uppermost surface of a floor once construction has been completed but before any finishes have been applied.
What is FFL in electrical engineering?
Finished floor level (FFL) refers to the uppermost surface of a floor once construction has been completed but before any finishes have been applied.
What is the difference between RL and FFL?
What is NGL and FGL?
The confusion is that the level which we generally see is FGL(finished ground level) then to know NGL do we need to dig out the soil and check the hard stratum. Also is the use of columns in foundation dependent on this NGL. Because if there is just 0.5-1 m difference in NGL and FGL we don’t need column.
What does FFL mean on drawings?
finished floor level
Frequently on contract drawings (plans, sections and elevations), finished floor level may be abbreviated ‘FFL 27,000’, the figure suffixed denoting the level in metres above a defined datum level (usually outside ground level or ground floor level).
What is SIL level in building?
Safety integrity level (SIL) is defined as a relative levels of risk-reduction provided by a safety function, or to specify a target level of risk reduction. In simple terms, SIL is a measurement of performance required for a safety instrumented function (SIF).
What is floor V level?
there is literally absolutely no difference between the words “level” and “floor” in either region. Absolutely no difference, they are 100% interchangeable at all times. If you are saying second floor, you can also say second level.
Which is the best SSL certificate?
The Top SSL Certificate Providers
- Comodo.
- DigiCert.
- Thawte.
- GoDaddy.
- Network Solutions.
- RapidSSLonline.
- SSL.com.
- Entrust Datacard.
What is the difference between FFL SFL and SSL?
SFL refers to the level at the top surface of the floor screeding or concrete topping. While SSL refers to the level at the top surface of the structural slab. Now, when an architect starts to design a storey, which one do you use as your Floor Level? Is it the FFL, SFL or SSL?
What is SFL (structural floor level)?
The term SFL, full form Structural floor level, refers to the concrete topping or floor screeding’s top surface level. Generally, there is a 50 mm difference between SSL and FFL.
What is SSL in concrete flooring?
SSL (Structural Slab Level) is typically more used within the industrial and commercial markets and is very simply the level of which the structural concrete floor slab would finish, however the term SSL is only use if there was to be other finishes to be placed over the structural slab.
What is the FFL of a building?
Generally, FFL is 150 to 450 mm above the natural ground level so that rainwater and stormwater do not enter inside the building. If the building is located in a massive rainfall area and slope, this height may go up to meters. What is Structural Floor Level?
