How wide is a 74 Nova rear end?
Table of Contents
How wide is a 74 Nova rear end?
Unit is 60.25″ wide.
How wide is a Chevy Nova rear end?
Products specifications
| Vehicle Fitment | 62-72 GM X-body vehicles (Nova, Chevy II, Super Sport, Apollo, Omega, Ventura) with single or multi-leaf rear springs |
|---|---|
| Brake Space | 2.5 inch axle standoff |
| Width | 62-67 = 57.875 inches / 68-72 = 60.250 inches (between wheel mounting surfaces) |
How wide is a 1970 Nova rear end?
MEASURED ACROSS WHEEL MOUNTING SURFACE
| Year | Classic Vehicles | Width Rear |
|---|---|---|
| 65-67 | Nova | |
| 68-72 | Nova | 60″ |
| 78 & up | Monte Carlo, Regal, etc. with 10 bolt axle | 58″ |
| 68-72 | Chevelle with 10 bolt axle |
How wide is a Chevy 10 bolt rear end?
The 8.5-inch 10-bolt rearend was used in cars and trucks over a wide range of years. It first appeared in 1970 production cars as a corporate replacement for the 8.2-inch 10-bolt rearend.
What rear end is in a 74 Nova?
1968-74 Chevy Nova Ford 9″ Rear End Housing and Axles, Mono Leaf.
How wide is a 12 bolt Chevy rear end?
The rearend cover on passenger car 12-bolt rearends is oval, measuring 10-15/16-inches wide by 10-5/8-inches tall.
How wide is a 1965 Impala rear end?
Products specifications
| Vehicle Fitment | 65-70 Full-sized Impala, Bel Air, Biscayne and station wagons |
|---|---|
| Suspension Brackets | Matched to OEM fitment and locations |
| Wheel Bolt Pattern | 5 on 4 3/4″ with 7/16″ studs installed |
| Brake Space | 2.5 inches (axle standoff) |
| Width | 63 1/2 inches (between wheel mounting surfaces) |
Will a Camaro rear end fit a Nova?
No, the rear end will not fit.
How wide is the rear end in a 1957 Chevy?
Just measured one and it’s just shy of 60″.
How wide is a 67 Camaro rear end?
60.25 inches
Products specifications
| Vehicle Fitment | 67-81 GM F-Body (Camaro/Firebird) with mono or multi-leaf rear suspension |
|---|---|
| Brake Space | 2.5 inch (axle standoff) |
| Width | 67-69 = 60.25 inches / 70 1/2-81 = 61.25 inches (between wheel mounting surfaces) |
| Fluid Capacity | 3 quarts of 85w-140, non-synthetic (API GL-6 rated only) |
How wide is a 1969 Camaro rear end?
60 inch is stock width. 55 to 55.5 or so is the common width for use with a 12 inch wheel and 6 inch backspacing.
What gear ratio is a 12-bolt Chevy rear end?
Probably the easiest 12-bolt differentials to find are the type 2 units. These are found primarily in standard-performance Chevrolet passenger cars. Type 2 ratios were somewhere between 2.29:1 and 2.73:1.
How wide is 55 Chevy rear end?
55-57 Chevy is 60-1/4″.
How wide is the rearend of a 69 Camaro?
55 to 55.5 or so is the common width for use with a 12 inch wheel and 6 inch backspacing. Last edited by 68protouring454; 02-21-2008 at 09:35 PM.
