How much power does NRF24L01?

How much power does NRF24L01?

Power consumption(receive) – 13mA. Power consumption (transmit) – 11mA. Frequency – 2,4GHz.

How connect NRF24L01 to Arduino?

Wiring a nRF24L01+ module to an Arduino To start, connect the VCC pin on the module to 3.3V and the GND pin to ground on the Arduino. Pins CSN and CE can be connected to any digital pin on the Arduino. In our case, these are connected to digital pins #8 and #9 respectively.

How do I know if NRF24L01 is working?

Test Experiment Connect one NRF24L01 to Uno R3 and the other to Mega2560. The nRF24L01 module on the UNO constantly sends data, and that on the Mega2560 receives data. Open the IDE and then Serial Monitor for the two boards respectively, and then compare the data sent and received to test whether it succeeds.

How do I know if nRF24L01 is working?

What protocol is NRF24L01?

nRF24L01 is a single chip radio transceiver for the world wide 2.4 – 2.5 GHz ISM band. The transceiver consists of a fully integrated frequency synthesizer, a power amplifier, a crystal oscillator, a demodulator, modulator and Enhanced ShockBurst™ protocol engine.

How much power does an Arduino Mega use?

With a 9V power supple, the Arduino Mega has a power consumption of 73.19mA, that is lower than the Arduino Uno with 98.43mA. If you reduce the clock speed, the power consumption decreases to 61.76mA and if you also reduce the power supply from 9V to 3.3V, you can achieve a current draw of 16.74mA.

Why is my nrf24l01 not working?

Make sure your connections, especially the MISO, MOSI, SCK pins of Arduino with the nrf24l01 module. 3. Try to change the library for nrf24l01 module. I recommend NRFLite available in the official Arduino website .

What protocol is nrf24l01?

What is NRF24L01 module?

Can nRF24L01 handle 5v?

The nRF24L01+ has 5v tolerant inputs.

Is nRF24L01 a WIFI module?

NRF24L01 wireless module which is developped by Nordic firm, is a module with low power consumption which gives you possibility to do wireless communication on 2.4GHz frequency. It has 2MBps communication speed which can be used usually in various hobby, robotics and industrial projects. It supports SPI interface.

How much power does an Arduino Mega 2560 use?

Can I power Arduino Mega with 12V?

the MEGA does support 12V DC input in the Jack – a big chunk of the power will get dissipated by the regulator as the MEGA converts down to 5V so that might have some unwanted heating effect depending on what you need to power through the board.