How do I reset my Veeder Root alarm?
Table of Contents
How do I reset my Veeder Root alarm?
Touch the red ALARM RESET button on the console’s front panel to acknowledge the warning/ alarm and shut off the beeper. Warnings and alarms will remain active until the cause of the condition is corrected.
How do you change the time on a Veeder Root TLS-350?
Setting the time on a TLS-350 Series Console:
- Press MODE until SETUP MODE appears.
- Press FUNCTION until SYSTEM SETUP appears.
- Press STEP until SET MONTH DAY YEAR appears.
- Press CHANGE, enter DATE and then press ENTER.
- Press STEP until SET TIME appears.
- Press CHANGE, enter time and then press ENTER.
What does an ATG system do?
An automatic tank gauge (ATG) is an electronic device, whose basic function is to monitor the fuel level in the tank over a period of time to see if the tank is leaking.
What is CSLD test?
Continuous Statistical Leak Detection (CSLD) monitors the product level and temperature in the tank at idle times. The system will continue to monitor the tank until it has gathered enough data to conclude that the tank system is tight, or there is a possible leak.
How do I clear the fault on my ADT alarm?
Go to MyADT.com and click on “My Alarm.” From the System Management option, select “Stop Test“ to remove the system from test mode and restore operations.
How often do certification and calibration of ATG need to be conducted?
Monthly: Recommended- keep one passing leak test printout per month for each tank. Annually: ATG equipment inspected and calibrated.
How do you fix the periodic test fail Veeder Root?
Review the CSLD Diagnostics Report
- Press MODE for DIAG MODE.
- FUNCTION to CSLD DIAGNOSTICS.
- STEP to CSLD DIAGNOSTICS REPORT.
- Press ENTER.
- If needed, press the TANK/SENSOR button to select the correct tank.
- Press PRINT to easily review the results.
How do I fix CSLD rate warning?
Troubleshooting Tips
- Confirm the tank’s thermal coefficient is correct. An incorrect thermal coefficient can cause the console to see inaccurate fuel volumes.
- Confirm the tank’s CSLD climate factor is set to Moderate. When set to Extreme, the displayed leak rate will be substantially increased.
How do I turn off my ADT alarm without the code?
If you own the ADT system, and your user code isn’t working, or you’ve forgotten it, the key fob will turn off the ADT alarm system without the code. If you have the key fob handy, simply press “disarm”––sometimes a little shield icon with the diagonal slash––and your system will disarm; no extra steps necessary.
